Jump to content
SAU Community

R32 Gts-T/4 Unresponsive Steering?

angusis2fast4u
 Share

Recommended Posts

angusis2fast4u Enthusiast

angusis2fast4u

Posted
Posted

Hi, I have a 32 Gts-t and the steering seems to be quite unresponsive and most noticable above 80-100kmh, and there seems to be a little play in the wheel. as far as suspension work goes i have front and rear camber arms (KKR) and a HICAS elimination kit, I also have castor arms and HSD coilovers.

I have a mate who has a 32 GTS-4 with just coilovers and camber arms and he has the same issue. (also both cars seem to crab a little while driving)

Is this a thing in all 32's? what can be done to get rid of it?

Link to comment
https://www.sau.com.au/forums/topic/449163-r32-gts-t4-unresponsive-steering/
Share on other sites
angusis2fast4u Enthusiast

angusis2fast4u

Posted
  • Author
Posted (edited)

Oh my god. Just take it to a mechanic already.

It's been.... Mechanic said he didn't know

Now if you read my question, I am asking a question which is NOT specific to MY car, I am asking if it is a common issue specific to R32's

If you're going to be arrogant make sure you are replying to a topic properly.

Edited by angusis2fast4u
GTSBoy Grand Master

GTSBoy

Posted
Posted

Oh my god. Take it to a decent mechanic.

Seriously - as if it is a common problem. It's probably the one thread on here that hasn't been started 40 trillion times.

By the way - nice description of your problem too. Didn't know if it was low power assistance, if it didn't want to turn in, if it was just understeering, etc etc etc.

Now you know why I didn't respond to your question properly. Because it was useless.

Sinista32 Grand Master

Sinista32

Posted
Posted

No it's not a thing in all 32's.

Take it to a good steering and suspension place.

They will provide you with an alignment print out and give you a list of the issues that need to be resolved and a quote to do the work.

angusis2fast4u Enthusiast

angusis2fast4u

Posted
  • Author
Posted

Oh my god. Take it to a decent mechanic.

Seriously - as if it is a common problem. It's probably the one thread on here that hasn't been started 40 trillion times.

By the way - nice description of your problem too. Didn't know if it was low power assistance, if it didn't want to turn in, if it was just understeering, etc etc etc.

Now you know why I didn't respond to your question properly. Because it was useless.

You do realize you have an issue?

angusis2fast4u Enthusiast

angusis2fast4u

Posted
  • Author
Posted

No it's not a thing in all 32's.

Take it to a good steering and suspension place.

They will provide you with an alignment print out and give you a list of the issues that need to be resolved and a quote to do the work.

Thanks Sinista for taking it seriously, I will take it to another shop and see what they say, I took it to a shop who i've dealt with for a long time now and always trusted them, maybe they just missed something but i'll take it elsewhere and see what they say.

Thanks man

Sinista32 Grand Master

Sinista32

Posted
Posted

Thanks but I'm like GTSboy. It's frustrating

32's are old/aged and most have been flogged, hit gutters, pot holes and people just don't look after their rides.

Could be anything or everything - Ball joints, bushes, shocks, tie rod ends, steering rack and the list goes on

From a $55 alignment to a $4000 dollar bill

I've had 2gts-t's and I've got one now. All have been tight and respond beautifully. Very direct.

Also I have spent small fortunes on some other skylines to get it to the same state.

niZmO_Man Grand Master

niZmO_Man

Posted
Posted

1. Take troubled car to mechanic to get diagnosis/fix

2. They can't find anything

3. Best thing to do is create a thread on SAU instead of taking it to another place, while still driving your car with dodgy steering?

Some potential issues: flogged out bushes in the upper arms|steering rack mounts|rear end, bad alignment, weirdly worn/dodgy tyres, worn dampers.

Good luck and post the issue(s) and fixes for reference.

Also, crabbing cars => bend chassis?

Elegant Skyline Enthusiast

Elegant Skyline

Posted
Posted (edited)

And just to build this thread up, just cos your mates car has a similar issue doesn't mean it's a common problem.

So going by your logic, when will it to be considered a 'common problem' to you Mr Ben?

three cars? or four? maybe even five?

Edited by Elegant Skyline
Ben C34 Grand Master

Ben C34

Posted
Posted

Ok. Semi related. This happened. Took it to technician they said no worries . Also happened to a mate.

What do you guys think?

post-107339-0-09947200-1412224808_thumb.gif

They say a picture paints a thousand words, hopefully animation paints 9000 words.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...