Jump to content
SAU Community

Recommended Posts

Hi I was looking at my rb25det block and I tried to take a measurement on it any way my micrometer is is to big to measure the oil restrictors. So my question is I am trying to find out if these oil restrictors are stock or after market I came up to a number that seems to small to be stock, the measurement is around .055 which is about 1.40mm so I am not sure if these are stock or not. The number I came up with is probably off as I can not get a accurate measurement.

Thanks
Richard

post-137014-0-06922300-1413938824_thumb.jpg

post-137014-0-72695400-1413938843_thumb.jpg

post-137014-0-69933500-1413938874_thumb.jpg

post-137014-0-45619300-1413938904_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/449929-rb25det-oil-restrictors/
Share on other sites

I have read the oil control thread but blocking one feed and restricting the other does not sound like a good idea to me as I am running the car as a street car and hydraulic lifters. People say well the rb26dett has smaller restrictors and one oil hole blocked off but the 26 had solid lifter and not hydraulic lifters like the series 1 and 2 rb25det which means the lifters need a lot of oil. I am thinking of running a line from head to sump but not sure about the restrictors or blocking off a oil hole.

Hi Ben C34 I was using a vernier calipers.

Thanks

Richard

Can't believe you're still thinking of running a line from the head to the sump after reading the thread.

Don't forget vct supplies some oil to the top but if you are not keen on blocking off one of the oil supplies you can do what I did - fit 2 x 1.0mm restrictors.

  • Like 1

Hi KiwiRS4T do you have hydraulic lifters, BTW I like your idea on running 2 x 1.0mm restrictors, so do I put the 1.0mm restrictors in the middle and rear oil feeds. BTW when I looked at the restrictors on the tomei website it says do not use restrictors in conjunction with the hydraulic lifters which seems not to be correct.

Thanks

Hi KiwiRS4T do you have hydraulic lifters, BTW I like your idea on running 2 x 1.0mm restrictors, so do I put the 1.0mm restrictors in the middle and rear oil feeds. BTW when I looked at the restrictors on the tomei website it says do not use restrictors in conjunction with the hydraulic lifters which seems not to be correct.

Thanks

Front and rear leave the VCT alone. What kind of oil pump are you using? What are you using the car for - track only? Street car? Circuit track days?

Actually mines on an RB30 block with an RB25DET head with hydraulic lifters and an external supply to the VCT.

Never mind Tomei get the restrictors from me!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...