Jump to content
SAU Community

Recommended Posts

Hi,

These were for my time attack beast but i have since bought a complete race car with brakes already.

you will also notice these are the same calipers the Z-tune GT-R has and also on many top level motorsport racing cars, the best of the best.

Rotors are

x2 L/R 378mmx35mm 72vane

x2 L/R 355mmx32mm 72vane

Calipers

Magnesium alloy

x2 Brembo L/R 6pot/piston Titanium

x2 Brembo L/R 4pot/piston Titanium

Both front and rear are less than half the weight of OEM brakes and bigger at the same time.

Front Brembo Pads included 2 Sets.

Bobbins and hardware also included

I can have brackets and hats made up to suit any car.

PRICE $7600 priced to sell, Please dont waste my time.

PM or PH 0431 113 255

2014-11-16192426_zpsbc9b8d1c.jpg

2014-11-16192400_zpsb0a2f89c.jpg

2014-11-16192417_zps706957fd.jpg

2014-11-16192341_zps7bcf116a.jpg

2014-11-16192218_zps5f0cbee8.jpg

2014-11-16192124_zpsd7b57cde.jpg

2014-11-16191950_zps070baf0b.jpg

2014-11-16191933_zpsdb638f7e.jpg

2014-11-16192308_zpsd7c91401.jpg

2014-11-16192236_zps6fc3d57b.jpg

Fark lotto, anyone know where I can sell a kidney lol

IIRC the Z tune has the same brakes as the R35 GTR so these are much better :yes:

R35 brakes are different to these

These things will shit all over Z tune and R35 brakes in every department.

These are used by some very serious race teams in Lemans, like Porsche and Ferrari just to name a few.

These will also fit under 17"te37's and most 18s

Cancnc brackets and hats to fit any car, a standard brembo street package is about same price only you get crappy rotors that dont handle the track abuse, these will outlast your tyres.

Also just to confirm the z-tune runs different calipers to the r35, z-tune are exactly same as the gold ones here just painted silver.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...