Jump to content
SAU Community

Recommended Posts

Well I already have an extended sump. I was wondering if I should run a accusump oil accumulator. After reading up on it a bit. I slowly started to understand how it works.

The way it works. I dont think you would even need a larger sump for that matter

In the event you lose oil pressure for a split moment the accumulator would take care of it until oil pressure is returned. Well for any where from 15 to 60 seconds.

Has anyone used them before.

The car im building is for around 800hp the very most. And only for drag racing.

The oil accumulator can even be used for pre oiling before start up. Cost wise I dont even see a need for a extended sump really.

Any thoughts would be very appreciated.

Link to comment
https://www.sau.com.au/forums/topic/450883-oil-accumulator-or-extended-sump/
Share on other sites

We have a 9 liter sump and will be using one also.

You can never be too careful when it come to maitaining oil pressure, all you need is that one time you kept the revs up and pooled oil into the head to run the sump dry or high g forces to move the oil around and uncover the pickup.

Its good insurance.

This R33 GTR build includes an extended sump, (same as yours I believe) HKS oil pump, oil restrictors and accusump. I'll find the page for you (although the whole thread is interesting) ...its page 47, post #701 and on the next page post #713 there is a link (reproduced below) that he made on the operation of his accusump.

http:www.skylinesdownunder.co.nz/forums/index.php?topic=66378.690

Http://youtu.be/uhRfUegqwxg

If ONLY drag racing with no high G corners then not worth the effort cost wieght etc

Extended baffled sump will be enough

Edit, your running rwd with slicks yeah, get the Accusump cuase once those front wheels get airborne all bets are off

If drag racing the design of the frontal sump setup is working against you, on hard launches oil will move to the rear when you need it forward.

Even gated and higher capacity is no guarantee that enough oil will remain over the pickup for long enough, most of the top level of oil will try to go over the baffel towards the rear.

A hard 4WD drag launch on sticky rubber is heaps of g force.

Idealy the sump should have been designed on the rear.

We have a freind with a drag racing Supra that logs oil pressure, on the launch and next 2 gear changes logs recorded the oil pressure dropping to zero before he woke up to what was happening......

As I said above, slicks is a different ball game, I checked the data logging on my 34 after a trip to the drags with Toyo TQs and I had no oil pressure issues

There is so many variables you can not really compair two different engine setups

We are the manufacturer of the Accusump, we always recommend looking into a better oil pan first. With that said, a front sump in a drag racer is a recipe for disaster and I personally would jump into an Accusump right away. The front sump oil pan will be working against your oiling system almost immediately. Our best dealer for New Zealand is a company called Demon Tweaks. Their website is www.demon-tweaks.co.uk.

  • Like 1

Never heard of Demon Tweaks and the UK is about 12,000 miles away - the US is closer. Accusump from Canton is available from a number of speed shops in NZ but the one that comes to mind first is Cardwell Racing. I presume there will be a number of suppliers in Australia as well.

From what I hear its a bit more expensive to do a tune up. Well that also depends on the accumulator size your going to use. Like he said above on a oil change discharge it and the oil capacity of the accumulator is the additional amount of oil you will add to your sump. Start the motor up close the valve to the accumulator after about 1 minute of running. Check your oil level with the valve close with engine off. If all is good. There ya have it.

They only con I see to have this part is the space it takes up.

I rattled my brain as to where to mount this part. I may end up taking out the ac condensor and mount it round that area. Right behind the hood latch and on top of the intercooler.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...