Jump to content
SAU Community

350Gt-8 Cvt! Help

vios_4500
 Share

Recommended Posts

vios_4500 Newbie

vios_4500

Posted
Posted

Hi everyone

My 350GT-8 cvt has a problem in gear shifting. This appears when I drive it for 40-50km. Once the problem start it will reduce the gears by itself and stay at 1st gear. When you keep the car switch off for couple of minutes and turn it back on it will drive for some time without any problem.

It has done 65000kms all together. Any helpful opinion would be highly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/451233-350gt-8-cvt-help/
Share on other sites
sonicii Veteran

sonicii

Posted
Posted

Probably a sensor fault.. you will likely need someone with a consult2 to figure out what is happening. They can be expensive to fix, and a lot of people have written off the car when they have had problems with this particular CVT.

  • Like 1
Nightcrawler Grand Master

Nightcrawler

Posted
Posted

Please, PLEASE use the search function before starting a new thread - this has been covered DOZENS of times before. And as Sonicii said (and from my own experience) you have basically bought a lemon, and it is more than likely unfixable. These are VERY unreliable gearboxes, VERY expensive to troubleshoot and almost no-one in Australia has the expertise to fix them.

sonicii Veteran

sonicii

Posted
Posted

These are VERY unreliable gearboxes, VERY expensive to troubleshoot and almost no-one in Australia has the expertise to fix them.

don't know if I would say they are particularly 'unreliable'. the problem comes when something goes wrong.. you struggle to find someone even willing to look at it.. then struggle to pay the repair bill when you do.

vios_4500 Newbie

vios_4500

Posted
  • Author
Posted

don't know if I would say they are particularly 'unreliable'. the problem comes when something goes wrong.. you struggle to find someone even willing to look at it.. then struggle to pay the repair bill when you do.

Hi mate, do you no anyone who can scan it and find the problem. I have been to few guys and with their tools they couldn't. If u know someone in Melbourne please let me know.

Thankz

sonicii Veteran

sonicii

Posted
Posted

Sorry, I don't know anyone in Melbourne. If you have any decent Nissan dealers, they should be able to check it for you.. otherwise, it might need someone with a consult2/3 clone. I don't think the basic OBD2 tools will access the TCM.

  • Like 1
Leroy Peterson Grand Master

Leroy Peterson

Posted
Posted

How long have you had the car and how many kms have you done? Do you know the gear oil has ever been replaced? (Just curious) im doing a full flush next week, sump will come off so will have a quick look for any sensors

vios_4500 Newbie

vios_4500

Posted
  • Author
Posted

How long have you had the car and how many kms have you done? Do you know the gear oil has ever been replaced? (Just curious) im doing a full flush next week, sump will come off so will have a quick look for any sensors

It is with me for nearly 3 years and I have done about 20000 kms. Just want to let you know one mechanic told me cvs shouldn't be flushed but I don't know it is for a fact.

Leroy Peterson Grand Master

Leroy Peterson

Posted
Posted

people have different theories on fiddly gearboxes in a "if it aint broke dont fix/maintain it" sort of attitude. Personally, I think being proactive is a better way to go.

I've just imported my car with 100,000kms and the day after it gets rego'd im doing a full flush on the CVT.

  • 1 month later...
vios_4500 Newbie

vios_4500

Posted
  • Author
Posted

My car is fixed. It was a speed sensor fault. Guy who repaired it was an expert in these cars and if you r in Melbourne and wanting a good machanic contact him. Thanks everyone for their comments.

Nandi Autocare

Motor Engineers & Repairers - Keysborough, VIC

1 Futura Rd, Keysborough VIC 3173

03 9706 3444

  • 4 weeks later...
ADDSKI Contributor

ADDSKI

Posted
Posted

I have just finished conversion of my gt-8 to 6sp M/T. The only exsisting issue is to customise centre console which i have decided to buy an E-stopp parkbrake system which really is just providing hole for switch......I strongly believe that it is cost feasible to do conversion. Cvt oil is roughly just under $1000 every service interval of 20000km. A conversion kit is around $2000. If you are mechanically knowledged you shall find conversion of a medium factor. What a lot dont add to cost saving is that once M/T is installed you now have your vehicle tare weight under 1500kg ( with cvt = 1550KG). This in New South Wales equates to a yearly registration saving of around $140. I WAS A MECHANIC BACK IN 94' HOWEVER REALLY WOULD HAVE LIKED FOR A SHOP TO CONVERT FOR THE SIMPLICITY OF HAVING A HOIST. I WENT TO 40 DIFFERENT SHOPS AND ALL SAID NO EVEN THOUGH I WROTE STEP TO STEP INSTRUCTIONS. MODERN MECHANICS TODAY JUST WANT TO SERVICE, REALLY ARE YOU SURE YOU ARE MECHANIC!!!!!!!!!!!! FOR THOSE OUT THEIR CONSIDERING CONVERSION I AM HAPPY TO PROVIDE HELP WITH ANY KNOWLEDGE NEEDED DURING CONVERSION.....ADAM---0435729442....SYDNEY :yes:

Leroy Peterson Grand Master

Leroy Peterson

Posted
Posted

My car is fixed. It was a speed sensor fault. Guy who repaired it was an expert in these cars and if you r in Melbourne and wanting a good machanic contact him. Thanks everyone for their comments.

Nandi Autocare

Motor Engineers & Repairers - Keysborough, VIC

1 Futura Rd, Keysborough VIC 3173

03 9706 3444

Glad it's sorted, thanks for sharing

Also Nissan factory service manual says cvt oil to be changed every 100,000kms. I don't know why you would think 20,000kms is acceptable for an oem box

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Nizzy_R34
      r34's love to squeal

      By Nizzy_R34 · Posted

      just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • Duncan
      Engine sputter

      By Duncan · Posted

      My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Duncan
      S1 Autech 260RS Wiring Diagrams

      By Duncan · Posted

      Awesome, thanks for sharing!
    • Duncan
      Nissan fuga 450gt android screen

      By Duncan · Posted

      To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...