Jump to content
SAU Community

Recommended Posts

Will it fit in my honda????

Looks the biz mate. Was the front end of a GTR hard to align all the panels or not really. Seen the conversion done a few times and they look heaps beter then a standard stag ;)

  • Like 1

Will it fit in my honda????

Looks the biz mate. Was the front end of a GTR hard to align all the panels or not really. Seen the conversion done a few times and they look heaps beter then a standard stag ;)

the front end was already on another stagea mate so was made to fit, has MASA conversion guards, headlights were on adapter mounts and had a modified r34 GTR reo to mount the headlights also . original GTR bonnet is on adapter plates to the original stagea hinges but im not happy with them so im looking for some R34 GTR hinges .i also had to trim the original stagea rad support. most of the conversions ive seen also use all FRP bonnet and front bar, the conversion i got is all nissan apart from the guards.

thanks, Ben.

  • 4 weeks later...

Nice choice on the stagea Ben. The Gtr front really suits the stagea body. Good on you for posting this up for all to see. I know mcm fans including myself are pretty interested in ichiban and the builds we don't get to see on mcm. Cheers

whats the new colour...................................?

soon will be revealed ;) its not a subaru or nissan colour

And what's this VG30 bell housing business....?

never you mind, its not for vg30 though :D

I think I read that he is going '06 STI silver / grey

was, but actually looked green on the test panel.

This is very impressive. If i started my stagea journey again i would seriously consider doing the same.

I reckon those G35 rims would look perfect on my M35 :P

thanks mate , you are welcome to test fit the wheels, i think they'd suit most nissans personally.

Mechanical Stig,

Will you help to source one more front just like yours to put on my C34 Stagea too?

this one came up by chance, my subaru parts supplier had it sitting in his yard so we just jumped on it , we bought the whole stagea, cut it up and shipped it back in parts . if another one pops up we'll bring it over for sure , but i cant really order parts in as we deal with scrap yards and it we just have to wait and see what comes in. if you are after special order parts, best to speak to Aaron at Import monster, he'll be able to sort you out for sure.

Nice choice on the stagea Ben. The Gtr front really suits the stagea body. Good on you for posting this up for all to see. I know mcm fans including myself are pretty interested in ichiban and the builds we don't get to see on mcm. Cheers

thanks for the feedback mate , we are going to start puting a lot more of our builds on the ichiban facebook page including my new track car ( which is still in japan at this stage ) . if you are interested in our other builds , check out the Fb page , facebook.com/ichibanimports .

thanks guys, Ben.

  • Like 3
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Here is a recipe. Sonic blocks till you get one that has a good enough bore. Get a torque plate and block brace, use your choice of fasteners (arp ect) bolt the thing together empty, half fill it and let it cure. Release it when it has, go to a REPUTABLE RB Builder and get the thing line bored/honed and cylinder honed to size, then wash. Once its all clean and dandy, wash and blow it out again. Then again.  Assemble said engine to your desired clearances with oil control mods, gasket to suit desired CR/Squish ect. Attach your extended sump with proper trap door oil baffles and head drain plumbed to sump with a SUMP BREATHER SYSTEM. Build your front diff with a decent LSD, rebuild your transfer case with a few extra plates, more than likely replace your tailshaft centre bearing and tighten up the rear diff. Tune to minimise excessive midrange cylinder pressure (timing unless you like to split bores and rebuild engines) Enjoy your engine, but hate the fact you are now destroying engine mounts, gearboxes, gearbox mounts, diff output flanges and driveshafts, diff mounts, tailshafts and front CV's.   Disclaimer.... Ive never done any of the aforementioned stuff.......
    • 440s will support well over 400HP on petrol, which is a decent place to be for an RB20. 230+rwkW. Will be a safer bet for idle/low load. 550s would be nice for the extra headroom. I've made the same decision with mine (Neo25). 1000s are probably too big for the Nistuned ECU, so I have some smaller ones.
    • Appreciate everything guys. I did go ahead and get an alignment... most of my complains are solved. Car is not perfect, but it's good enough. If I notice uneven tire wear or anything I'll just take everything back to stock.  Thanks again!
    • They still have not shipped the 550cc injectors as they weren't in stock, so in theory I could ask to get the 440cc ones instead, if those work better in my scenario. They're the same price so really shouldn't be an issue. Unfortunately I am not so knowledgeable in most parts of tuning so I wasn't sure what's best to choose between the two. 440cc ones are the lowest they have (not in stock, but available to buy nonetheless).
×
×
  • Create New...