R33 Gtr Clutch Kit Advice

[Kurruptt]

Hey guys, I have been scouring the forums for the last 2 hours or so trying to find some good advice on clutch upgrades. I have Nismo RS580 turbos and Tomei Poncams fitted. Naturally, the standard clutch has spat the dummy

Does anyone have any recommendations for 500-550hp and good pricing for my R33 GTR v-spec?

Thanks in advance, you guys are always brilliant

[Piggaz]

Nismo coppermix twin plate.

Drives almost like a stocker, takes a raping harder than a hooker, lasts for ages.

Job done.

[Ben C34]

How can you possibly have missed that a nismo copper mix twin comp spec is the clutch you need?

Edit.

Typed that way too slow!

Edited December 8, 2014 by Ben C34

[Kurruptt]

Piggaz, you have a way with words Sir hahahahaha

What are the normal expected costs on something like that? IS it worth upgrading the flywheel at the same time to a Nismo?

[KiwiRS4T]

Try scouring the "drivetrain and transmission" section.

( I think a flywheel comes with the Nismo kit).

[Kurruptt]

How can you possibly have missed that a nismo copper mix twin comp spec is the clutch you need?

I put it down to my inherent mental retardation.

[Hadouken]

There are like 4 dedicated threads about clutches.

This is how it usually goes down.

Piggaz says nismo twin plate

I say NPC

Some dude comes out the bush and says I have a 4500lb clamp load on my jim berry clutch drivetrain doesnt even cry.

[89CAL]

Try scouring the "drivetrain and transmission" section.

( I think a flywheel comes with the Nismo kit).

This.......

I'm sorry but there is a whole dedicated section for Clutches, Gearboxes and so forth. Please post/ask in the right section

[Ben C34]

Here's a nice clutch.

[Piggaz]

Piggaz, you have a way with words Sir hahahahaha

What are the normal expected costs on something like that? IS it worth upgrading the flywheel at the same time to a Nismo?

It comes with one.

My coppermix has been in the car since 2005. Over 350 launches, 7000 rpm plus launches. Started life holding 370 kw, now holding 470 rwkw. No rebuilds, no slipping, no nothing. Set and forget.

With the Yen so weak ATM, you should be able to have one at your doorstep for under $2k. You even get a Nismo sticker!!!!!

[Kurruptt]

It comes with one.

My coppermix has been in the car since 2005. Over 350 launches, 7000 rpm plus launches. Started life holding 370 kw, now holding 470 rwkw. No rebuilds, no slipping, no nothing. Set and forget.

With the Yen so weak ATM, you should be able to have one at your doorstep for under $2k. You even get a Nismo sticker!!!!!

The sticker is worth the 2k alone!! hahaha Thanks guys, sorry for posting in the wrong area. I have been looking at SAU for a long time now and still struggle sometimes to find the simplest stuff.

Thanks for your help all the same!

[GTRPSI]

There are like 4 dedicated threads about clutches.

This is how it usually goes down.

Piggaz says nismo twin plate

I say NPC

Some dude comes out the bush and says I have a 4500lb clamp load on my jim berry clutch drivetrain doesnt even cry.

That would be me, 4500lb, nah 5700 Jim berry.

[Hadouken]

Haha. Nailed it