Jump to content
SAU Community

Recommended Posts

I'm looking at importing in Jan and thought I'd post up the approx costs as I have them so far--- :woot:

Based on a car that costs $4500.00 at the block.

ITEM -Car Cost (FOB Yen) 550000 Exchange Rate (Yen to A$) 99.83= AUS$ 5509.00 (inc Japanese Agents handling cost).

---------------------------------------------------------------------------------------------------------------------------------------------

1/BROKER FEE -------------------------------------------------------UP FRONT. $1,100./

2/FOB price in Australian dollars------------------Within week of purchase. $5,509./

3/Insurance @ 3.5% of 1-2-4-5 =$9410.00 pay on purchase of vehicle-- $ 321./

4/Shipping, wharf, Customs and agents fees ---Upon arrival 4-5 weeks. $1,800./
5/Import Duty & GST ----------------------------------Upon arrival 4-5 weeks. $1,011./

6/Compliance---------------------------------------Upon completion 12 weeks. $2,500./

-----------------------------------------------------------------------------SUB TOTAL-$12241./

7/(Add—Rego $350.00 , Tyres--$$600.00 , Roadworthy(?)=+$990)-------$990./

-------------------------------------------------------------------------------------TOTAL$13231.00

Edited by BASHO
Link to comment
https://www.sau.com.au/forums/topic/451790-thinking-of-importing-costs/
Share on other sites

What vehicle are you getting?

I assume there is none in Australia for sale

What would you estimate resale?

AAAAAAAAAAAHHHRG---I'm still procrastinating :turned:

Probably an R34GT-t Auto , (I've had a manual one before).

There are a fair few available here but they a mainly of the 'enthusiastically over enhanced' variety.

Depends on what I end up getting.

13 g for an auto r34?

Surely not.

Importing, I have been assured that it can be done -- with patience .

There are a number on advertised here (In Australia) for less than $13K but 'modded' somewhat.

Edited by BASHO

Al, have you weighed up the fact that Auto R34s depreciate at a rate of knots?

Thus, you can pick up one already here at around your budget and...

i) have a choice of colour

ii) have a choice of mods

iii) physically inspect it before handing over money

iv) because car sales are slow from Dec-Feb, you can haggle more aggressively

yeah in all seriousness, if you cant find an auto 34 somethings wrong.

i would not go through the importing process to get one.

my mate bought one the other day in silver very clean for 9000 cos it was auto.

yeah in all seriousness, if you cant find an auto 34 somethings wrong.

i would not go through the importing process to get one.

my mate bought one the other day in silver very clean for 9000 cos it was auto.

Al, have you weighed up the fact that Auto R34s depreciate at a rate of knots?

Thus, you can pick up one already here at around your budget and...

i) have a choice of colour

ii) have a choice of mods

iii) physically inspect it before handing over money

iv) because car sales are slow from Dec-Feb, you can haggle more aggressively

Thanks for the replies guys , you are absolutely correct and if I could get to any of them I'm sure given very little time I could find one , however , I am currently living in Hervey Bay , which , whilst still theoretically on the planet actually in many regards may as well not be , this would seem to be one of those regards.

I also have to bear in mind that should I buy privately without actually physically seeing the car I'll be up for around $350.00 per inspection and given the somewhat optimistic descriptions given by some sellers ,-- I could see this turning out quite costly .

I've done more than a fair amount of searching and there are 3 that are very promising looking, two in Vic and one --particularly-- in SA which I'm following and if the price were not $2K over what I can bring one in for I'd likely be going for it.

I'll also note that I could be up for a road trip --not a bad thing but $ or up to $1000 maybe $1500.00 in freight buying onshore

So guys you can see buying onshore unless I can find what I'm after in Brisbane (which is still an 8-9 hour round trip by the timeyou've done what you went for) has some hiccups.

:cheers:

Edited by BASHO

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...