Jump to content
SAU Community

R35 Gtr "normal" Brake Noise?


Recommended Posts

Hey guys,

How much squeaking/screeching is normal with these cars?

I'm told by Nissan that brakes are not covered under warranty because the car is a super car (I think that's very easy to challenge legally, but I'll leave it for now).

My GTR has been making a lot of noise at low speed and when coming to a stop. Nissan insist that this is normal due to the iron in the brakes...but I'm not so sure it is. Didn't have this issue with my old car. Frankly it is a bit embarrassing.

I know I keep comparing to other companies lol, but when I had the same problem with my Range Rover Sport, JLR changed the brakes under warranty and the sound vanished and they're still going strong....had the same issue with old BMW X6, BMW did the same. Changed the brakes, sound vanished. Incidentally, every time it has happened, it happens early on in the car's life (less than 5000kms).

Maybe I'm just a bad driver and kill brakes?

Thanks all.

Edited by IOWNU
Link to comment
https://www.sau.com.au/forums/topic/451826-r35-gtr-normal-brake-noise/
Share on other sites

There will be some level of rattles coming from the brakes (over bumps), but not squeeling or squeeks - unless they are fouled by something between the pad and rotor.

Have you checked for cracks in the rotors? Any cracks (if you have not tracked it) will be warranteed - but you will need to write a letter to Nissan Australia in order for them to approve it. Most dealers will push back.

Thank you kindly for the advice.

I am getting them thoroughly checked on Saturday, so I'll take pics and then write to Nissan (I'm assuming head office?) if there is an issue there. I think that might be the case, as haven't had this problem in the past.

Cheers.

Edited by IOWNU
  • 2 weeks later...

My car did it too. Its because they've glazed over. You've probably been city driving so brakes aren't getting a work out. Theyre basically racing brakes. Take your car through the hills or get it up to speed and jump on them a few times. Itll clean them up and shouldn't have a problem until they build up again

  • Like 1

They're right about the higher iron content causing brake noise. The more aggressive racing brakes are noisy as faark especially when cold. Generally they chew the shit out of rotors too but that's the compromise of the stopping power required to pull up the big heavy beast!

There are some lubricants that go between the pads and the piston and the pad guides that can help with noise but they need replenishing pretty often as the extreme heat in brakes dries the lube pretty quick. Back when VT Commodore came out (no comparison I know!) but they had bad brake noise, disc wear and disc warping, we used to glue the pad to the piston to stop it moving and causing noise. The original pads were also very high iron content, they released a revised pad with a lot less iron again as a noise/wear/heat reduction.

We just had a customer replace his R35 rotors with AP Racing ones and EBC Yellow stuff pads (modded with power upgrades) and no noise issues city driving, pulls up like crazy.

With new cars, remember it takes a bit of time to bed in the pads to the rotors, first few thousand may be noisy but they should settle in.

A few high speed stops should take care of them.

Edited by GTRPSI

Hey guys, yes this is normal behaviour if you are not working the brakes. Drive the car how it should be driven and there will be no noises..! remember not to leave your car sitting around after you wash the wheels, drive it and get those brakes working. The high iron content in the pads will cause the discs to rust and bind to the pads. Not that this has happened to me but it is common and I have heard of it happening to some owners.

Hi GTRPSI, just a quick question. You mentioned in your last post you had a customer install AP Racing J Hooks and Yellow pads.

Do you work for a workshop in Melbourne. ?

I used to have this set up on my 2010 GTR and they were awesome.

Can you get this kit for the 2014 GTR or know of the best place to get them?

Cheers

We are agents of RDA/EBC pads so we supplied him with the Yellow Stuff pads, customer got the AP Racing rotors and hats as a kit from O/S, he had a mate fit it all up for him.

I did a bit of reading on the pads. Thy say the business.

I thought I might of had them last time old my 2010 GTR but I am not sure now. I know they were yellow but that could be another brand also?

What is the cost for a set of pads for a 14 GTR?

  • 1 year later...
  • 1 month later...

I feel your pain. I had the same long fierce EEEEEE...... squeal, tried new pads & rotors doesn't seem to help. Until i tried quality aftermarket pads, like endless MX72 semi street pads... The brake still make noises but it's more due to metallic compound in the pads which actually sounded rather cool like a true sports car. Having said that, every car is different aftermarket pads might worth a try. Quality aftermarket pads works better and cheaper than oem ones.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...