What Ecu,intercooler For M35 These Days

[ShonE]

Hei guys, i finally got some time and cash to finalize my tune and after replacing stock with high-flown turbo 3 months ago finally get this car back on the road properly. So far apart from turbo i got shift kit and full exhaust sorted, i gotta get Injectors,intercooler with transmission cooler and ECU... So gotta ask what are the best options for the ECU and intercooler these days. The idea was to get to 300kw with ethanol conversion, so whatever works best.

thanks

[Brick]

Hi shone, where are you located?and who will be tuning it? That will make a bit of a difference towards ecu options. There is only a few options either way though. Emanage ultimate is still the most supported and cheapest option, but 300 killawasps is a fair bit for a piggyback. F-con is a great option if you can be lucky enough to find a harness for it. I use Adaptronic which I am very happy with but still working on getting it perfect. Will be going back in in late January to hopefully get it all finalized.

As far as front mount just get the Hdi unit. Straight bolt on and flows more then enough for what you want and plenty more.

[ShonE]

Hi shone, where are you located?and who will be tuning it? That will make a bit of a difference towards ecu options. There is only a few options either way though. Emanage ultimate is still the most supported and cheapest option, but 300 killawasps is a fair bit for a piggyback. F-con is a great option if you can be lucky enough to find a harness for it. I use Adaptronic which I am very happy with but still working on getting it perfect. Will be going back in in late January to hopefully get it all finalized.

As far as front mount just get the Hdi unit. Straight bolt on and flows more then enough for what you want and plenty more.

Thanks Brick, Im in Melbourne so Scotty is doing all the work. Not sure who exactly is doing the tune as we are not that close to it yet. Just spoke to him and seems like Emanage is pretty much the only option and as i understood 300kw has been done on it and it shouldn't be a problem :0. Fcon's are impossible to get as ive heard, or? And with haltech im looking at 3x the money, so i guess theres only 1 option right?...

with HDI kit i would need slim fan? Can anyone help with this, what exectly am i looking for and where to get, any links would be great.

Also for that Emanage, where is the best to get it from and also what exactly should i be searching for as i found more than few of Emanage ECU's but which one is for m35...

Its just that i need to order these so they arrive by the time im ready to get it all done...

thanks

[Brick]

EBay for all of above. Yes 300kw has been done on Emanage. You need and Emanage ultimate with a universal wiring harness.

Slim line fan is just a generic slim 12" thermo from eBay

[ShonE]

EBay for all of above. Yes 300kw has been done on Emanage. You need and Emanage ultimate with a universal wiring harness.

Slim line fan is just a generic slim 12" thermo from eBay

http://www.ebay.com.au/itm/Greddy-E-Manage-emanage-Ultimate-w-universal-Harness-/120630579957

is that the one or, coz theres a few different ones at different prices.

thanks

[ShonE]

Also is this the fan that should fit http://www.ebay.com.au/itm/ONE-12-PULL-PUSH-RADIATOR-SLIM-Electirc-Thermo-FAN-MOUNTING-UNIVERSAL-AUS-/171540637640?pt=AU_Car_Parts_Accessories&hash=item27f09e67c8

And i forgot about transmission cooler, what should i look at?

.

thanks

[Daleo]

Get the largest one you can physically fit in your chosen location; Repco sell PWR which are a proven product.

[ShonE]

ok thanks for the replies.. i sorted out the ECU http://www.ebay.com.au/itm/Greddy-E-Manage-emanage-Ultimate-ECU-ONLY-with-software-and-laptop-cable-/131164002218?pt=AU_Car_Parts_Accessories&hash=item1e89fbd7aa

scotty has the harness ..

The only thing i need to get is MAP sensor and i found these 2 on ebay they are not genuine but is there any potential issues with these and is there difference between these two apart from the price...

http://www.ebay.com.au/itm/3-Bar-5-Volt-MAP-Pressure-Sensor-Greddy-eManage-Ultimate-HKS-FCON-Power-FC-/110850708786?pt=AU_Car_Parts_Accessories&hash=item19cf379532

http://www.ebay.com.au/itm/3-Bar-5-Volt-MAP-Pressure-Sensor-Greddy-eManage-Ultimate-HKS-FCON-Power-FC-/301314888105?pt=AU_Car_Parts_Accessories&hash=item4627c451a9

And the only thing left is the transmission cooler.

any advice

thanks

[KiwiRS4T]

I have a genuine GM MAP sensor but I would be tempted top try one of the Hong Kong sourced MAP sensors advertised on US Ebay for about $12 post free! I would think they would be very similar to the ones you have linked.

[ShonE]

If there is genuine listed id get it but i would have to wait a week to hear from that Japan guy plus by the time it arrives it will take a month, and the plan was to get the car done by the new years so.. Want to sort everything out by mid january hopefully... its just those things i mentioned that i cant find or not sure what to get

[Trex]

Have you looked into adaptronic's e420d? They have an inbuilt map sensor and base maps to get the car running. Target afr, closed loop tuning, aux outputs for boost soleniod etc. and great customer service and trouble shooting. Hypergear on here sell them

[ShonE]

Have you looked into adaptronic's e420d? They have an inbuilt map sensor and base maps to get the car running. Target afr, closed loop tuning, aux outputs for boost soleniod etc. and great customer service and trouble shooting. Hypergear on here sell them

thanks ill check it but think scotty said emanage is pretty much the best option as fcon is not available...

Can someone help with transmission cooler, what do i need, where to get?

[Daleo]

Do you read all the posts in your thread?

[ShonE]

Do you read all the posts in your thread?

yeah why?

[Daleo]

PWR. Repco.

[KiwiRS4T]

"Yeah why?" Because you have already asked the question before and someone (Dale) has gone to the trouble of answering it already so the fact that you ask the same question again suggests that you haven't bothered to read the reply.

[ShonE]

"Yeah why?" Because you have already asked the question before and someone (Dale) has gone to the trouble of answering it already so the fact that you ask the same question again suggests that you haven't bothered to read the reply.

I actually thought he was talking about the fan for HDI kit not the trans cooler... sorry and thanks

[joshm35]

Do some reading in 'what you have done to your stagea' thread and other associate threads as there is alot of information in there. Also look at m35 parts pinned thread. These will be helpful to you and will stop the repost issues where people get shitty with.

@kiwirs4t.......... what kind of cooler was it again???

[joshm35]

http://www.sau.com.au/forums/topic/452307-cheap-transmission-cooler-kits/

[KiwiRS4T]

Same as yours PWR