Jump to content
SAU Community

Recommended Posts

Hey guys

Thought It was finally time to create a build thread for my R33 gtst as its coming along nicely and not to far off getting it out on the track for the sau championships. Hopefully for round 2 29th March.

I brought the car back in July 2014 as a unregersted stocker for $4000 with the intention on just entering a few track days here and there but that quickly has changed and now the aim is to build it up for the WTAC to compete in the open class.

post-84279-14208063234503_thumb.jpgpost-84279-14208063380424_thumb.jpg

Since then I've been buying parts for it most weeks and slowly getting it closer to how I want it.

First was a set of BC ER coilovers 9kg front and 7kg rear.

post-84279-1420806451604_thumb.jpgpost-84279-14208064688793_thumb.jpgpost-84279-14208064892183_thumb.jpgpost-84279-142080650985_thumb.jpg

post-84279-14208066258887_thumb.jpgpost-84279-14208066660171_thumb.jpg

Also went in were whiteline front and rear sway bars.

post-84279-14208069432409_thumb.jpg

Next was a set of R33 GTR wheel which I brought off another sau member.

post-84279-14208070749935_thumb.jpg

Which I decided to bring them back to life and painted them black.

post-84279-14208071679792_thumb.jpg

post-84279-14208074413859_thumb.jpg

Also brought some semi slicks to wrap them in. Brought some nitto nt01.

post-84279-14208073266436_thumb.jpg

Over the next few weeks I brought a few more go fast bits. Bpp Billet fuel rail, splitfire coilpacks, apexi power fc with hand controller, tomei fuel pressure regulator, walbro 450ltr fuel pump, Bosch 1000cc injectors, bride low max seats and a pair of D2 330mm 8pot brakes with race pads.

post-84279-14208080548781_thumb.jpgpost-84279-14208080656826_thumb.jpgpost-84279-14208080770801_thumb.jpgpost-84279-14208080884917_thumb.jpgpost-84279-14208080994456_thumb.jpgpost-84279-1420808115474_thumb.jpg

post-84279-14208090919726_thumb.jpg

Next the car was sent off to mcqueen motorsport for a full cage. Had a few hiccups there but eventually got the work done after a few months sitting at the shop. Decided on full weld in 6 point cage($2500). Also had to removed the sunroof to give me a little bit more headroom. Now left with a gapping hole in my roof which should be getting fixed in the coming weeks.

post-84279-14208088054373_thumb.jpg

post-84279-14208082666846_thumb.jpgpost-84279-1420808280969_thumb.jpgpost-84279-14208082961318_thumb.jpg

Got it home and the gave it a few Coates of matte black paint.

post-84279-14208083432498_thumb.jpgpost-84279-14208083545996_thumb.jpgpost-84279-14208083656818_thumb.jpgpost-84279-14208083760969_thumb.jpg

Got to spend some time on the car over my holidays and installed the D2 brakes.

post-84279-14208089924718_thumb.jpgpost-84279-14208090270963_thumb.jpg

Removed all the sound deadening and gave the interior a fresh coat o gloss white paint to clean the inside up a bit.

Link to comment
https://www.sau.com.au/forums/topic/452512-wilsons-r33-gts-t-time-attack-build/
Share on other sites

Next on the to do list is find a panel shop to patch up the hole in the roof and respray the front bar. So if anyone on here knows of a good panel shop please let know.

After that is sorted the car will be sent off to racepace to get a tune with all the parts installed.

Still need to buy either garrett or Hypergear turbo which I have on my daily. Top mount 6boost manifold, plazmaman plenum.

Looks great so far. Whens the aero coming to play?

Tao does the SS2 Alpha with FNT, makes 350kw+. Though on your standard engine...not sure how far the internals go in a track day arrangement.

Most of the guys struggled to hold oil pressure over 350kw.

Before giving the front bar a tidy up, perhaps figure out what cooler mounting and ducting is needed, and whether you'll even retain the stock bar? Richo's build thread has a lot of good info/pics.

What sort of power will you chase out of this thing? I've wondered how a Hypergear TDO6SL2-20.5G would perform for a track application like this. Mightn't go much past the 300kW mark but it should be responsive and reliable unit.

Looks great so far. Whens the aero coming to play?

Tao does the SS2 Alpha with FNT, makes 350kw+. Though on your standard engine...not sure how far the internals go in a track day arrangement.

Most of the guys struggled to hold oil pressure over 350kw.

Aero shouldn't be to far off. Need to get that front bar lower and design up a front splitter. Either looking at getting a rear wing similar to yours or a decent size carbon fibre GT wing. But they are a bit pricey. Still pretty new to all the aero stuff tho.

Yeh that's the exact turbo I've been looking at from Hypergear. I've got the SS2 on my daily and have been pretty happy with it.

Before giving the front bar a tidy up, perhaps figure out what cooler mounting and ducting is needed, and whether you'll even retain the stock bar? Richo's build thread has a lot of good info/pics.

What sort of power will you chase out of this thing? I've wondered how a Hypergear TDO6SL2-20.5G would perform for a track application like this. Mightn't go much past the 300kW mark but it should be responsive and reliable unit.

Power figure I'm roughly looking at chasing atm is 300-350rwks on e85. But will most likely rebuild the engine this year to chase over the 400rwkw. Considering doing a 25/30 setup to achieve that.

  • 4 weeks later...

post-84279-14228421045287_thumb.jpg

post-84279-14228574523741_thumb.jpgpost-84279-1422857462506_thumb.jpg

post-84279-14228574719155_thumb.jpg

New engine time!!

Forged rb25/30 getting built as we speak.

Fully prepped block

Argo rods

Arais Pistons

King turbo bearings

Arp studs

Balanced and ground crank

Full reco head

Welded vct

Can't wait to drop this is in nd hit the track. Will post up more pics as the build comes along.

Edited by BLK-51N

Also decided that since I'm spending all my hard earned money on this car that it was time to insure it with Shannon's. Got a pretty good deal for an agreed value on $20,000 only $500pa. Good to have that peace of mind. Don't no what I'd do if something happened to it uninsured.

Hey well the aim is to have it fully ready with the 25/30 in it by mid year hopefully. But should have the car out on the track at sandown on the 4th of April.

Mainly just gunna enter in the sau championships and the WTAC.

Yeh for sure come in nd I'll show you around the car.

Just hanging out bad to get this ready nd out on the track. See how much power I can push out of this forged rb25/30.

Edited by BLK-51N
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...