Jump to content
SAU Community

Recommended Posts

I'm pretty sure if you went through the archives of all your footage you'd have some comedy gold.

Though some of it probably wouldn't go too well with current CAMS and safety regs!

I'm pretty sure if you went through the archives of all your footage you'd have some comedy gold.

Though some of it probably wouldn't go too well with current CAMS and safety regs!

Like running on the skid pan with passengers no helmets?

those were the days.

or what happens when the Handbrake is ripped in a XR6??

thought the rear axel was coming out of this car at the 28 sec mark:

Like running on the skid pan with passengers no helmets?

those were the days.

or what happens when the Handbrake is ripped in a XR6??

But they had taco bill sombreros on, that was official safety gear back in the day!

Yeah I never did master the handbrake in the taxi's, it felt worse in the car lol

SAU VIC Motorkhana #1
Foresite Training
Banfield Crt, Nth Laverton.

Thank you for entering our first Motorkhana of 2015 and the first event we have run at Foresite Training.

Please ensure that on the day you have
- Valid CAMS Club Membership
- Valid CAMS L2 or greater license
- You are wearing ankle to wrist clothing
- You have a helmet that conforms to CAMS
- Valid fire extinguisher with metal bracket
- Remove as much from your car and leave it at home

Anything that remains in your car can be stored in the warehouse. We will have an area cordoned off.
It is however stored at your own risk!

Anyone who is towing their car must unload the car in the car-park across the road from the venue.
An SAU VIC marshal will assist you in getting from that car-park to the venue.
No spectators or support vehicles are to be parked at the venue. Parking it either on the street or the car-park across the road.

Passenger runs will be available. Passengers are required to adhere to clothing and helmet rules.
Spectators are more than welcome, so tell your friends and family.
There is a large market further down on Leaks Rd, which makes for traffic chaos.
To avoid this take Dohertys to Palmers Rd or take the Palmers Rd exit off the fwy.

We will be cooking bacon and egg rolls for breakfast $2
We will be cooking burgers and have soft drink and water available for lunch $3, $2 drinks.
So bring some coins and make it easy for us!

post-59171-0-10767600-1424737521_thumb.jpg

If you wish you may bring your own raw meat and consume it off-site. Unfortunately I cannot guarantee adequate toilet facilities will be available for the aftermath.

  • Like 1

If you wish you may bring your own raw meat and consume it off-site. Unfortunately I cannot guarantee adequate toilet facilities will be available for the aftermath.

can't we just all line up along the fence facing the paddock?

Was reading through the regs and came across this:

"18 PASSENGERS:

As noted above (Regulation 15), persons who wish to be Passengers in PART A of the event MUST sign the indemnity and have the back of their left- hand stamped to gain admittance to the circuit during this session.

No passengers are to be carried in PART B of the event. Passengers MUST satisfy the same requirements as Drivers with regard to clothing and the wearing of an approved helmet (see Regulation 11). Passengers are covered by CAMS insurances. Persons under the age of 14 years are not permitted as passengers. All Passengers must sign the Indemnity at documentation"

I couldn't find where it defined what PART A and PART B of the event were...

SAU VIC Motorkhana #1

Foresite Training

Banfield Crt, Nth Laverton.

Thank you for entering our first Motorkhana of 2015 and the first event we have run at Foresite Training.

Please ensure that on the day you have

- Valid CAMS Club Membership

- Valid CAMS L2 or greater license

- You are wearing ankle to wrist clothing

- You have a helmet that conforms to CAMS

- Valid fire extinguisher with metal bracket

- Remove as much from your car and leave it at home

Anything that remains in your car can be stored in the warehouse. We will have an area cordoned off.

It is however stored at your own risk!

Anyone who is towing their car must unload the car in the car-park across the road from the venue.

An SAU VIC marshal will assist you in getting from that car-park to the venue.

No spectators or support vehicles are to be parked at the venue. Parking it either on the street or the car-park across the road.

Passenger runs will be available. Passengers are required to adhere to clothing and helmet rules.

Spectators are more than welcome, so tell your friends and family.

There is a large market further down on Leaks Rd, which makes for traffic chaos.

To avoid this take Dohertys to Palmers Rd or take the Palmers Rd exit off the fwy.

We will be cooking bacon and egg rolls for breakfast $2

We will be cooking burgers and have soft drink and water available for lunch $3, $2 drinks.

So bring some coins and make it easy for us!

you reckon xena can come and spectate? post-135183-14250251653974_thumb.jpg

  • Like 2
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...