Jump to content
SAU Community

3071r

triggerhappy

By triggerhappy,
in Engines & Forced Induction

 Share

Recommended Posts

tridentt150v Grand Master

tridentt150v

Posted
Posted

http://www.sau.com.au/forums/topic/419955-looks-like-garrett-slipped-another-gtx30-variant-in/page-19?hl=%2B3071#entry7448162

http://www.sau.com.au/forums/topic/344089-garrett-medium-frame-gtx-turbos/page-58?hl=%2B3071#entry6324329

http://www.sau.com.au/forums/topic/55845-rb25-turbo-upgrade-all-dyno-results/page-32?hl=%2B3071#entry5247046

http://www.sau.com.au/forums/topic/43864-new-garrett-3071r-experiences/page-4?hl=3071#entry1653759

And this is just 4 threads of 23 pages of threads, the 3071 has been around for quite a few years and in many variants. If you did some reading you would see this and be able to make your own informed comparative decision.

Its not up to people on here to do your research, but you could ask for help finding specifics if you got stuck. But I would think about how you actually did that, your present approach is somewhat lacking.................

Link to comment
https://www.sau.com.au/forums/topic/452858-3071r/#findComment-7463576
Share on other sites
triggerhappy Collaborator

triggerhappy

Posted
  • Author
Posted

I did look at that more specifically i was looking for dyno sheets. There is a difference with what people say and siting a dyno sheet. The only one that i could find that had a dynosheet only had the 3071 turbine so i would assume as a turbo newbie that it would be quite different to the one i have.

So in short i did do my research and couldnt find what i was after. This is why i posted here.....

Link to comment
https://www.sau.com.au/forums/topic/452858-3071r/#findComment-7463581
Share on other sites
AngryRB Grand Master

AngryRB

Posted
Posted

:banana:If you havnt bought the turbo yet, just play it safe and get a GT3076 0,82 its proven and will satisfy most.. end of story.. also sounds awesome .. just pick your rear housing for the desired power/response , jobs done..

Link to comment
https://www.sau.com.au/forums/topic/452858-3071r/#findComment-7463945
Share on other sites
Kanaric Enthusiast

Kanaric

Posted
Posted (edited)

Heaps of threads with info like you just gave me you peanut. I am after info on rb25 which if you actually look at it there is not much...

You see up there on top of this forum there is a RB25 dyno thread right?

GOOD info on turbos is probably the most plentiful information on this forum. I know because I routinely use the search button.

Edited by Kanaric
Link to comment
https://www.sau.com.au/forums/topic/452858-3071r/#findComment-7463985
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...