Jump to content
SAU Community

Mongrel turbo makes 220rwkw

GTRgeoff

By GTRgeoff,
in Engines & Forced Induction

 Share

Recommended Posts

GTRgeoff Grand Master

GTRgeoff

Posted
  • Author
Posted

Thanks for all the feed back and compliments. I found the guys at Creatd and Bresciani to be good on the communication side, knowing exactly what I wanted. This being the second engine rebuild I don't want to do it again for a few years.

I even put Opticrap (optimax) in for added security. with my tinkering I have found i have to run less boost or timing for the shell product and credit it for my first engine.

The 25 hours labour was mine, so I saved $$$ there. Other quotes for my engine only, drive (tow :D) in and drive away have been posted at $7000 - 9000. I personally struggle to find any mechanic worth that much since I have the qualifications myself and the parts/machining was just over 3K so say $3500. That makes the labour $3500 and at 25 hours is $140 per hour. What a farkin ripoff.

Roy, Pred and Enrico all have hit the nail on the head with seperate considerations and explanations of the tuning philosiphy. Great effort guys. You'd make great engine builders/tuners IMO.

DoughBoy Veteran

DoughBoy

Posted
Posted
Roy, Pred and Enrico all have hit the nail on the head with seperate considerations and explanations of the tuning philosiphy. Great effort guys. You'd make great engine builders/tuners IMO.

Heh no offence, but Troy if you come anywhere near my car with a tool I'm unleashing the hounds!

GTRgeoff Grand Master

GTRgeoff

Posted
  • Author
Posted

Well I'm whoring my garage to him at the moment. What good is an engineer who can't confidently swing a spanner.

He's pretty cluey actually and seems to know what he wants. Does some damn good welding too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Starting again

      By Kinkstaah · Posted

      Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Duncan
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Duncan · Posted

      Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...