Jump to content
SAU Community

Recommended Posts

Hi all,

Time for our next monthly meet. This month we are holding a club dinner where all are invited to come along, have a feed and get to know each other.

Date: Friday, 20th March 2015

Time: 7:30pm

Venue: Lilly’s Restaurant. 162 Prospect Highway, Seven Hills. NSW 2147. (Enter via Quinn Ave)

Map: Click here for map

Menu: See attachment.

Accessibility/Parking: Lilly’s have been kind enough to allow enough parking spaces for all our cars to be parked safely.

This is an official SAU:NSW event and will be run under a CAMS permit.

One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general.

When attending one of Skylines Australia NSW events please try to:

• Be aware of surrounding environment and act accordingly.
• Drive courteously on the state’s roads as a true enthusiast should.
• Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly.

• Any misbehaviour will not be tolerated and you will be asked to leave.

Thanks,
Raj.

Lilys Restaurant Menu.pdf

  • Like 1

Attendees:

1). vorse

2). Yo-Yo

3). MrFijiGold

4). Redline_GTR

5). GTofuS-T

6). sammi_d

7). suwidji

8). Goldzilla

9). etab4u85

10). r32-25t

11). Terry-GT_R34

12). StageIan

13).

14).

15).

16).

17).

18).

19).

20). luke gtr

  • 2 weeks later...

Im in, I should be finished work by then. :yes:

Can I bring my partner?

Sez

Yes Sez, bring your partner along. See you then! :)?

Put me in for this one, it's right airing the corner from home

Done and done!

Do you think it's ethical of me to tell my 6 o'clock client (who talks a lot) that I need to leave for a 'housecall' at 7 (at Quinn Ave Seven Hills)? Yes, why not! Hehe...

Don't worry Terry... I'll be telling my manager the same thing!! Lol

Do you think it's ethical of me to tell my 6 o'clock client (who talks a lot) that I need to leave for a 'housecall' at 7 (at Quinn Ave Seven Hills)? Yes, why not! Hehe...

We've got an appointment doc for some food therapy, 500 cc of pizza grease STAT!

  • Like 2



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...