Jump to content
SAU Community

Recommended Posts

Will need to be repaired and blue slipped to get off written off register I believe??

I had a car written off and paid out 3500 but only cost 400 to buy it back... Might be worth it depending on repair costs.

first quote was 7600 :/ reason why im so concerned about this is because ive just put about 7k into the motor

What do you reckon they will say dale? I still have to get one more quote an see what happens. Has anyone ever fought a insurance company in regards to writing a car off due to hail? Because by the look ofthe first quote im going to be right on the boarder line of being written off.

I'm betting that they'll write it off; it's only insured for $4k, and this is the last year we were going to fully comp insure it.

Because it's with Shannon's; I'm hoping that they'll pay it out, let me retain the "wreck" and then simply restrict us to 3rd party property insurance in future.

Could always buy it back? Not sure on how that process works though

With Shannon's I have first refusal for the wreck; but my repairer reckons that they'll probably just let me have it with a slightly reduced payout, to account for the buy back value.

Just read through it. Yeah i can buy the car back for salvage and have first pick. Still dont know what % of value they work off though

They'll have it valued for auction, when I bought mine the valuer told me what he was going to tell the insurance company it was worth (sneakily) and they offered the same price to me.. ie no mark up

Yes, it's insured (as a Genki) for $17,400, so the damage doesn't come into the 80 percentile whereby it could become a write-off.

Volvo XC T6 - $3,400 for PDR only.

* Note that after the panels are all smooth again...

a) all dented mouldings are mandatory replacement items so that no water can enter any crevices

* But...

b) any scratches created by the hail are not covered and thus; no polishing is included in a hail claim

* After I get the cars back, we'll have to see about that! I shall need proper lighting to reflect and refract any scratches, because unless the paint is in its former condition, I believe that according to the PDS, I have a case for complaint.

I'm not surprised by the damage to the Mazda Terry; it's comparable to the last time Shell's car was damaged by similar sized hail.

Interesting how much less pdr is required on the XC60; clearly a lot more high tensile steel panelwork on it.

I agree regarding scratches from hail; the car MUST be returned to it's pre-hail damaged condition, for the repairs to be considered complete.

If the roof required replacement; they couldn't just hand it back in guide coat.

Hope you have a good outcome Adrian!

Still waiting for am answer on ours, Shannon's rang yesterday to ask when the car was going to be presented for assessment; it's already been viewed and photographed, our repairer had obviously neglected to submit his quote.

I'm wondering whether he is the right man for the job...




  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
×
×
  • Create New...