Jump to content
SAU Community

Recommended Posts

Car is gone so time to clean out all the parts. Prices negotiable and postage is at buyers expense from QLD. Contact via PM for more pics/info.

GTT Nistune package $550 – everything you need to get the most out of your bolt on mods. Never got around to installing this in my car, but all parts were purchased in working order.

R34GTT Manual ECU

Type 4 Nistune board and cable
Turbotech manual boost tee
Blitz 52mm mechanical boost gauge and cup
https://www.dropbox.com/s/zltyv6tx49ptvz6/2015-03-30%2020.48.21.jpg?dl=0

R34 plastic eyelids $80 – in sonic silver. Slight bend in one as per picture, does not affect ‘performance’. Affix with double sided tape.

https://www.dropbox.com/s/tbx9o9c0vok64k7/2015-03-28%2015.22.57.jpg?dl=0

R34 coupe front and rear standard bumper $120 for both – in sonic silver. Front bar is off a GT so no SMIC vent. Both in good condition with a few scratches from being in storage

https://www.dropbox.com/s/lwre91y656wf3qr/2015-03-28%2015.21.30.jpg?dl=0

R34 sub box $50 - fibreglass, moulded to fit corner of the boot. Small hole as per picture. sold pending

R34 coupe LED Tail lights $150 – same as these. All leds working when last fitted. Plug and play

http://www.ebay.com.au/itm/99-02-NISSAN-SKYLINE-R34-GTR-LED-Tail-lights-GTR-GTT-RB-/221143857491?pt=LH_DefaultDomain_15&hash=item337d337953

R34 GTT stock wheels $150 – gutter rash on most of the wheels. Average rubber.

R34 GTT stock coilovers $50 – cracked dust boots, came out of car with <100thousand k’s and were working fine

R34 GTT stock front indicators and side repeaters $80
https://www.dropbox.com/s/du7i20nmdwyb7zo/2015-03-28%2015.23.28.jpg?dl=0

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/455244-r34-parts-clean-out/
Share on other sites

What would you be after for just the Nistune board and cable?

PM me an offer, will have to be compelling to split up the pack

R34GTT Stock airbox and snorkel $100ono also available.

Edited by sonnyQ

Car is gone so time to clean out all the parts. Prices negotiable and postage is at buyers expense from QLD. Contact via PM for more pics/info.

GTT Nistune package $550 – everything you need to get the most out of your bolt on mods. Never got around to installing this in my car, but all parts were purchased in working order.

R34GTT Manual ECU

Type 4 Nistune board and cable

Turbotech manual boost tee

Blitz 52mm mechanical boost gauge and cup

https://www.dropbox.com/s/zltyv6tx49ptvz6/2015-03-30%2020.48.21.jpg?dl=0

R34 plastic eyelids $80 – in sonic silver. Slight bend in one as per picture, does not affect ‘performance’. Affix with double sided tape.

https://www.dropbox.com/s/tbx9o9c0vok64k7/2015-03-28%2015.22.57.jpg?dl=0

R34 coupe front and rear standard bumper $120 for both – in sonic silver. Front bar is off a GT so no SMIC vent. Both in good condition with a few scratches from being in storage

https://www.dropbox.com/s/lwre91y656wf3qr/2015-03-28%2015.21.30.jpg?dl=0

R34 sub box $50 - fibreglass, moulded to fit corner of the boot. Small hole as per picture. sold pending

R34 coupe LED Tail lights $150 – same as these. All leds working when last fitted. Plug and play

R34 GTT stock wheels $150 – gutter rash on most of the wheels. Average rubber.

R34 GTT stock coilovers $50 – cracked dust boots, came out of car with <100thousand k’s and were working fine

R34 GTT stock front indicators and side repeaters $80

https://www.dropbox.com/s/du7i20nmdwyb7zo/2015-03-28%2015.23.28.jpg?dl=0

Sub box and taillights gone, everything else available. make an offer

Edited by sonnyQ

Prices revised, willing to separate Nistune package. PM offers

GTT Nistune package $500 – everything you need to get the most out of your bolt on mods. Never got around to installing this in my car, but all parts were purchased in working order.

R34GTT Manual ECU

Type 4 Nistune board and cable
Turbotech manual boost tee
Blitz 52mm mechanical boost gauge and cup
https://www.dropbox.com/s/zltyv6tx49ptvz6/2015-03-30%2020.48.21.jpg?dl=0

R34 plastic eyelids $70 – in sonic silver. Slight bend in one as per picture, does not affect ‘performance’. Affix with double sided tape.

https://www.dropbox.com/s/tbx9o9c0vok64k7/2015-03-28%2015.22.57.jpg?dl=0

R34 coupe front and rear standard bumper $100 for both – in sonic silver. Front bar is off a GT so no SMIC vent. Both in good condition with a few scratches from being in storage

https://www.dropbox.com/s/lwre91y656wf3qr/2015-03-28%2015.21.30.jpg?dl=0

R34 GTT stock wheels $150 – gutter rash on most of the wheels. Average rubber.

R34 GTT stock coilovers $50 – cracked dust boots, came out of car with <100thousand k’s and were working fine

R34 GTT stock front indicators and side repeaters $50
https://www.dropbox.com/s/du7i20nmdwyb7zo/2015-03-28%2015.23.28.jpg?dl=0

R34GTT Stock airbox and snorkel $80

Also have an R34GTT AFM (pink label) in working order - $70

bump sat alone in a boggy marsh....

Will have access to wheels on Wednesday so will be bringing them to my house and posting pics.

All prices adjusted!


GTT Nistune package $450 – everything you need to get the most out of your bolt on mods. Never got around to installing this in my car, but all parts were purchased in working order.

R34GTT Manual ECU

Type 4 Nistune board and cable
Turbotech manual boost tee
Blitz 52mm mechanical boost gauge and cup
https://www.dropbox.com/s/zltyv6tx49ptvz6/2015-03-30%2020.48.21.jpg?dl=0

R34 plastic eyelids $60 – in sonic silver. Slight bend in one as per picture, does not affect ‘performance’. Affix with double sided tape.

https://www.dropbox.com/s/tbx9o9c0vok64k7/2015-03-28%2015.22.57.jpg?dl=0

R34 coupe front and rear standard bumper $90 for both – in sonic silver. Front bar is off a GT so no SMIC vent. Both in good condition with a few scratches from being in storage

https://www.dropbox.com/s/lwre91y656wf3qr/2015-03-28%2015.21.30.jpg?dl=0

R34 GTT stock wheels $150 – gutter rash on most of the wheels. Average rubber.

R34 GTT stock coilovers $50 – cracked dust boots, came out of car with <100thousand k’s and were working fine

R34 GTT stock front indicators and side repeaters $50
https://www.dropbox.com/s/du7i20nmdwyb7zo/2015-03-28%2015.23.28.jpg?dl=0

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...