Jump to content
SAU Community

Recommended Posts

are the grills for the coupes and sedans the same?

would be interested in a group buy if it is or if they are flexible with the purchase

I have been in contact with ionicdynamics in the US and they don't do a emblem less grill for the 370 or G37 as they call it.

They will be doing one soon though and will let me know.

I have been in contact with ionicdynamics in the US and they don't do a emblem less grill for the 370 or G37 as they call it.

They will be doing one soon though and will let me know.

Dang, ah well worth the wait, their stuff looks pretty damn impressive!

Did you happen to come across their ducktail they do for the G35? Was keen as on one of them when I had one haha

considering buying this one, painting it in a gloss black

http://www.ebay.com.au/itm/170657832435?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

and debadging the infiniti badges on the rear

assuming it fits my 2009 kv36 although it says it's for a pv36 g35

Edited by mkn23

considering buying this one, painting it in a gloss black

http://www.ebay.com.au/itm/170657832435?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

and debadging the infiniti badges on the rear

assuming it fits my 2009 kv36 although it says it's for a pv36 g35

Post pics if you do. I was considering it also, but more out of desperation. The top & bottom rabbit teeth put me off. Why did they have to make it like that ffs?

Yeah looks bit odd. But I guess if you paint it black it'll blend in more. I'll be talking to someone later about cutting the emblem insert out and fabricating a replacement piece...surely it won't cost as much as the grill ...

Post pics if you do. I was considering it also, but more out of desperation. The top & bottom rabbit teeth put me off. Why did they have to make it like that ffs?

  • 3 weeks later...

My eyes hurt...

Hey Guys, Always hated the big Hamburger on the front of my 370GT.

Swapping to Infiniti badging doesn't appeal to me either.

So, I did this.

Basically I modified the Nissan Hamburger.

20150418_172750_zpsykuf6n3j.jpg

20150418_172710_zpsgb3urvgy.jpg

20150418_172834_zpsjc56ffel.jpg

I used a boot emblem & stacked it.

Cheers.

  • Like 1
  • 3 weeks later...

Just to clear up the whole infiniti/nissan badge swap saga.. Today I confirmed that the Nissan V36 coupe and Infiniti G37 coupe front grille badges are indeed the same fitment and can be swapped without modification, based on the fact that I received a Nissan V36 coupe midnight grille and fitted an Infiniti coupe badge to it. :)

Where did you get it???

Yahoo Japan, secondhand.

It came from here originally. http://model.auto-style.jp/v36coupe/CMS20251150011/

Fit is okay, but not as good as oem.

Fixings leave a bit to be desired, but will do the job.

Fiberglass, so quite a bit heavier than oem.

All in all, fairly typical aftermarket product.

Not Bad.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...