Jump to content
SAU Community

Recommended Posts

GTR brake upgrade,

I have been speaking to Brakes direct and have got some prices for brake upgrades with a 5% discount on 3 purchases and greater discounts with more interest

Alcon 6 pot fronts 378mm with 2 piece DBA 5000 rotors normally $2997 ($2848) with current discount

Alcon 6 pot fronts 365mm with 2 piece DBA 5000 rotors normally $2697 ($2562) with current discount

Alcon 4 pot Rear 335mm with 2 piece DBA 5000 rotors normally $2497 ($2373) with current discount (works with standard handbrake assembly)

All kits come with street brakes and can be upgraded for race pads depending on what you prefer for aprox $200 more.

Greatest advantage of this kit and reason for the cheaper price is the ability to run DBA rotors instead of Alcons which would run almost double the price.

The replacement cost on rotors is $385 for 365mm and $399 for 378mm each

All kits come with mounting brackets and offer free delivery Australia wide.

If all goes well order will be placed by the end of the month.

If you are genuinely interested please send me a PM as i will be posting this on a few pages.

post-96006-0-07574900-1429510450_thumb.jpg

post-96006-0-85229600-1429510460_thumb.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/455896-alcon-brake-upgrade-group-buy/
Share on other sites

What do the mounting brackets look like? Can we use standard/existing lines? Also whats the thickness of the rotors and any modification required to fit a 32gtr?

Edited by Jaeyon

i have been told they are direct bolt on with the correct bracket and the original lines should be compatible. i forgot to ask about thickness of rotor tho so not sure, but feel free to call and ask them. brackets will look something like this depending on model

post-96006-0-56305200-1429526014_thumb.jpg

How is the clearance with the 365mm under stock gtr rims? Does it retain the stock lengrh brake lines? (I have HEL braided lines)

Also is it possible to buy just the caliper and adaptor by itself?

Cheers

How is the clearance with the 365mm under stock gtr rims? Does it retain the stock lengrh brake lines? (I have HEL braided lines)

Also is it possible to buy just the caliper and adaptor by itself?

Cheers

365 clearance will be ok, 375 leaves very small gap, stones get caught and cut into rims as was discovered on a friends 32R.

Also adapters will work fine for your car Tim, you will need to space it out and shave a few mm off the hub to fit

Just an update guys, Anybody who is interested due to being a group buy the wait time on these calipers may be between 4-6 weeks.

We have been offered an alternative which i think is even better, We have been offered a free upgrade to the race version of this caliper.

The racing calipers are 600grams lighter than the road caliper, they have a removable bridge which makes changing pads a whole lot easier, and they come with knock back spring which helps keep constant pressure on the pads which reduces the need to pump the brake pedal when flying into a corner, and also helps reduce pad knock off.

These are normally $1000 more then the regular calipers so a much larger saving then the 5%.

The group buy will begin Monday and be closed by Wednesday at the latest.

If you choose to jump on board just call brakes direct on 1300724943.

PS the new caliper looks much nicer

  • Like 1

No problem, i just ordered mine now.

I also ordering a custom bracket made up for the rear brembos to space them out to run 350mm DBA 4000, 370z discs, with same pattern as the fronts.

Kit includes 2 brackets and 2 350mm DBA 4000 rotos, for $750.

Caliper picture and details for the motorsport model.

Sounds like an awesome deal for anyone looking for an upgrade.

I already have R34 Brembo 4 pots on my S14 and a pair of AP Racing 4 pots sitting around and am tempted to grab the 365mm kit!

Alcon-CR6380-spec.jpg

Edited by «Cyph3r»
  • Like 1

I'm finding Brakes Direct website hard to get around.

Can anyone comment on the hats and brackets they use? Also any experience with DBA 5000 series rotors vs Alcon would be great.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...