Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

getting ready to pull it off the road to paint.....

But before i do want all the body panels i need etc.

really REALLY struggling to find a gtr bonnet!!!!

If your getting it painted you could always get a fibreglass bonnet?

  • 2 months later...

Just a quickie update

Have since bought a gtr bonnet for the car. also sold the RPF1s and went, well bigger RPF1s!

18x 9.5 +20 and 18 x 10.5 +15

Also bought a gtr standard lip, some F1 style mirrors and roof spolier.

And from the current group buy, rear carbon under diffuser, canards and ab flug under lip thingo for the front.....

Have also decided on a yellow, which is the VE i think GTS / monaro Holden yellow. As you can see some mates thought it would be funny to paint strips and numbers etc

Im now in 2 minds to either get some over fenders for the rear or try and lip the rears by around 20mm, then camber. still deciding.

trying to find some GTR rear seats at the mo and ill get the gtr front and rears re covered....

12342871_10156337633815215_1878109601648

12670857_10156510557640215_1473669050132

12670322_10156510557585215_7573895374404

12644995_10156510557415215_1243511723405

12512794_10156444084365215_4651021102692

Hasnt been much done due to having bloody glandular fever!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...