Jump to content
SAU Community

Recommended Posts

Hi All,


I have been reading around for a while to try and figure out my next mods.


I like something around 500bhp from fly which i think would be around 400 at wheel, right ?


I don't want to go forge or change cams at this stage .


I have seen gt35,30,28 and number of others but not sure what is best for me .


everyone has a different opinion reading around . what would you get and what is the max power from the turbo at what psi ?


I think gt30 is low mount which is good but gt35 or other are high mount and if i was to run gt 35 , I think it will be very lazy as I will be running it at a very low boost , right ?


I think minimum mod to get to 500 bhp is :


550 or above injectors

bigger intercooler

ecu ( link 4)

turbo .


and possibly manifold if it is not straight bolt on as most people say gt30 is .


am i right ?can i expect safe 500bhp from the car with the above cost and mod ?


if I was to do this in stages and buy the turbo and do no remap but run it at low boost , will it work ?


many thanks

Link to comment
https://www.sau.com.au/forums/topic/456224-rb25det-turbo-choices/
Share on other sites

That's what the info is though isn't it?. What people think and have experienced is all over the forum.

You are asking for it to be laid out for you to make it easier for you. Which is spoon feeding.

How did you read for 5 hours and not figure out that an rb25 can easily make that power, that pretty much everyone talks kW, that Hypergear high flows bolt straight on, that a gt35 will be a lag monster etc.....?

You will get heaps of different answers, time to learn and make your own decisions.

You did say you and found lots of dif opinions, so do you expect anything dif from a new thread asking the same thing???

  • Like 1

Here ya go, this should get you started, be warned it may take you more than 5hrs of research to learn all thats needed.

Then again maybe not, it all comes down to you.

https://www.google.com.au/search?q=turbo+choice+rb25+sau&rlz=1CDGOYI_enAU590AU590&oq=turbo+choice+rb25+sau&aqs=chrome..69i57&sourceid=chrome-mobile&espv=1&ie=UTF-8&hl=en-US#q=turbo+choice+rb25+sau+site:www.sau.com.au&hl=en-US

OK. Even though you don't need assurance, here goes.

You can do it. You can do a good job if you out your mind to it. I believe in your abilities. You're really good at cars. Never give up. Don't stop believing. Keep on being you, you are wonderful.

For someone with limited funds you sure have alot of funds to spend, from your recent threads. Anyway you're asking what turbo's best for you? gtx3076 is what you want. And i mean that in a medical sense.

Trust me, i'm a doctor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
×
×
  • Create New...