Jump to content
SAU Community

Recommended Posts

Hey, anyone have experience with using this little gadget on a V36.

http://www.ebay.com.au/itm/201031617244?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

The GTR Guys use them for track days to avoid a bonnet pop from hitting a cone etc.

The connector looks exactly the same on the V36, I guess its probably just some sort of resistor.

I've emailed the seller in Japan & he could not say whether or not it would work with the V36, just that they have not tested it with one.

Has anyone here tested/using this on a V36 for track days etc?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/456412-bonnet-pop-up-cancellers/
Share on other sites

Best way to be sure would be to put an oscilloscope to one of the pins to see what voltages you see. If it's constant, then you're right, it's likely to be a purely resistive load. But if you see a pulse train of some sort, then chances are there's more to it than just a resistor, particularly if there's more than just two pins to the connector.

Ok, after a bit more research, I've spoken to a guy in Japan who helps me occasionally bring in Vintage Japanese Electric Guitars which I am a collector of.

He says, in Japan they make this for R35 GTR, V36, Y51 & Z34, one part fits all.

So as a bit of a favor he's going to source a set locally & send to me.

So, I guess I'll be the Guinea Pig. Does sound pretty positive though.

Cheers.

Sure, probably going to be 2/3 weeks before I get the parts & then probably another week to find time to do the job.

I'll do a pictorial "how to" if successful, for anyone that might want to do it also.

So unfortunately it could be a Month at the outside for a definitive conclusion.

So, bear with me if I don't update the thread for a little while,

Cheers.

Doing a 'how to' would be great, but I would be careful what you mention on a public forum.

Permanently canceling a pedestrian safety feature would be frowned upon by the authorities and your insurance in the case of an accident, especially if a pedestrian was hurt. You may end up paying any compensation yourself, even if it was their stupid fault.

Hi Scott, yes I fully understand that. I consider it a track only mod.

From what I gather its quickly reversible by just unplugging the modules & re-plugging in the Bonnet poppers (battery disconnected of course, thanks Ben.).

The "how to" is just to show people what they need to remove etc to get access to the connectors.

I certainly understand where your coming from though.

Cheers.

Edited by mycarhasposessedme
  • 3 weeks later...

Okay, good news.

They Fit & work 100%.

I ended up buying a set off Ebay to suit R35 GTR, as my mate in Japan let me down unfortunately.

Access to the connectors is pretty tricky but totally do-able.

With both Bonnet Poppers disconnected & the Cancellers installed there are no check lights on the Dash.

I've done around 1500k's with them now, Track only of course & no probs.

I'll post up some pics later.

Cheers.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...