Jump to content
SAU Community

Recommended Posts

So in my quest to find a very tidy GTR for the right price, I found a 1994 model r32 for 30k that seemed to fit the idea.

It was advertised as stock standard and in very good condition.

Not only that but it had a super low 30,000kms on the odometer which seemed unbelievable.

How could I go wrong? I went over to this guys place and out the front sat my ultimate r32 GTR.. white, low, gorgeous.. sitting there waiting for me to buy it.

The seller comes out the front, and informs me the car i'm buying is in his garage.

So I treck into the garage, and although the paintwork was quite good, the front grill was lying on the floor, exhaust parts where lying on the floor, the interior was terrible.. it had holes in the vinyl, cracks in the plastic around the gearshift, rusty rear vision mirror, cigarette burns in the worn seats.. I've never seen gearshift/handbrake boots so worn on an r32... the list goes on.

The car looked like it had done 300,000kms.

I asked about the one out the front and he told me that he bought both and he's keeping the one out the front. It struck me immediately that the car I was buying was nothing more than a parts car.. all the decent stuff had been swapped and placed on the other car. They where both the same body colour, same year..

I've never seen a GTR in such bad condition. DODGY!

What a huge insult on my intelligence. I got out of there faster than a man hating lesbian at a football game.

What pissed me off the most was I asked the guy to confirm the condition of the car over the phone and he told me it would be best to come out and see the car for myself.

What a huge waste of time and a dissapointment.

Link to comment
https://www.sau.com.au/forums/topic/45658-sick-of-people-selling-dodgy-gtrs/
Share on other sites

Meshmesh, your right..

Yeah its tempting going r33,.. about the same price range as what i'm prepared to spend on an r32, but I am not a fan of the whales.. I prefer how pure and raw the r32s are.

Though I dont want to say too much, I might end up sitting in an r33 and being called a huge hypocrite :)

Its a pain in the ass..

I've looked at a few GTR with my mate in melb.. Finding a good one is so difficult - and the amount of totally unbelieveable stories was ridiculous! Most were dodgy. That said there have been quite a few for sale I've seen recently which from the photos and details looked quite well priced.

I hope you aren't restricting your looking to just QLD ? As they don't seem to be as prevalant up here as in other states (like melb). An airfare is easily worth the price of getting something you want!

That car didnt happen to be located in the Sunnybankish area did it?

I'm in the same boat. Although my budget isnt that good.

I'm in no hurry though either. I've inspected more dodgy than good

so far. It will be worth it in the long run methinks, to be patient.

In the meantime, I will continue to ride my silver whale :)

I wish we could have a solid indication of R32 SEVS compliance. Otherwise

its 89's only it seems with the 15yr rule ending 1.1.05

Yeah, I dont want to give too much info about the specifics of the car and its location.

But I agree with you. There was a nice black one with gold enkei's out at logan that was not too bad but it got sold before I could get dollars together.

Pentae,I'm quite sure i know the car your talking about. This car is currently in the for sale section, and is listed on carsales? I'm very glad i saw this post. I was actually considering making the trip from vic to see this car.

Bad news for all us legitmate buyers. I've had my fair share of Bullsh*t down here in vic, specially with all these 89' GTRS. There is a group in vic i've been to see and all i can say is DODGY++

++++

+++++++++++++++++++++++..+++++

Pentae, I have a GTR for sale, she's an 89 model but is immaculate (and i'm not jerking anyone's chain there).... the worst thing that ADVAN had to say about it was that there's a bit of salt eating the paint off one of the rear wheels...

sorry to hear tha 1. someone stuffed you round like that and 2. there's a GTR in that bad a condition...

have a look at my ad (see signature)....

I WAS going to import an 89 gtr.. but there is way too much risk in buying a dodge one..

i will just wait a few years and get a good one i can realy appreciate..

sorry to hear all the crap u gone thru ey, im sure you will end up getting a good one if you wait.

Pentae, I have a GTR for sale, she's an 89 model but is immaculate (and i'm not jerking anyone's chain there).... the worst thing that ADVAN had to say about it was that there's a bit of salt eating the paint off one of the rear wheels...

sorry to hear tha 1. someone stuffed you round like that and 2. there's a GTR in that bad a condition...

have a look at my ad (see signature)....

Good luck with selling a 89 gtr for $31,000.

now people start to know "you pay for what you get"

there is no cheap GTR,if you want good GTR,than you need to pay more money or you will get shit car,

i think for 89GTR you really need to pay $25000~$30000

93~94 around $35000~$40000

for R33GTR $42000 over,

if anything less than that,thats mean the car wont be very good,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
    • Hi all,I already introduced myself in the Victoria section, but only saw this section now lol XD New to forums and new to skylines. Hoping to buy my new skyline within October
×
×
  • Create New...