Jump to content
SAU Community

Recommended Posts

Paging Trev to WT
 
Need a translation before I add this to the collection plzkthnxbai
 
 
5a80fed715e40_IMG_20180212_1037171.thumb.jpg.9e0162d45ee3a010f4b7ab68cb3d413f.jpg


Maybe you could ask sanae how vaccume docking station would be spelt, then by the magic of photoshop you could still live the dream?


Who would have thought a bike muffler wouldn't result in a sporty sounding bobcat? It seemed like such a foregone conclusion.
Yeah I would have thought it would sound cool. Length to internal diameter ratio on straight through absorption mufflers. The longer and thicker the absorption material Is the more high end frequency it will remove. We normally use 1/4" or 1/8" holes perforated sheet with a s/s mesh to stop it blowing the packing out. Can get you a magnaflow at cost if you want. The louder the better on bobcat:-) just enough to impede the headphones and spiders.


Friend had a SSS pulsar with a u13 bluebird engine (fwd sr20det) in it back in the mid 2000s, it would pull on tuned ls1 commodores of the day.
Never underestimate a Nissan with 3 s's dads mate bought a bluebird SSS years ago. The engine went hard for a n/a 4pot.
Nah mate, I'll just pick up the wheel tomorrow (I worked the last 5 days and couldn't anyway)
Yeah mate. Damn work is crazy atm. We finally got our new bender sorted. Or I bloody did. Want to make Nissan bits but exhausted. Someday :-)
She'll do it for you. Go the yellow beast.


Fired straight up. Changed oil n filter, scraped an inch of dust off the front window then drove it to the car wash for a birthday

spider webs hanging on

  • Like 1
Yeah I would have thought it would sound cool. Length to internal diameter ratio on straight through absorption mufflers. The longer and thicker the absorption material Is the more high end frequency it will remove. We normally use 1/4" or 1/8" holes perforated sheet with a s/s mesh to stop it blowing the packing out. Can get you a magnaflow at cost if you want. The louder the better on bobcat:-) just enough to impede the headphones and spiders.


The hydraulics are engine noise are loud so the exhaust is now inaudible.

I’m just happy it’s blowing away from me so I don’t get smoked out driving it
  • Like 1


The hydraulics are engine noise are loud so the exhaust is now inaudible.

I’m just happy it’s blowing away from me so I don’t get smoked out driving it
Broom broom moar power. Moar noise. Shifting the earth again. Animal :-)


Yes, it’s all awesome my bro and I used to do 2 x 100km loops every weekend there, so much fun!!
Haha The Shoeys just being animals behind the bars or wheels for fun every weekend. Awesomeness ;-)
  • Like 1
2 hours ago, Beyond Blue R33 said:

Can get you a magnaflow at cost if you want

orly? 

You have my attention. Been sidetracked with the new front end, forgot I still need a zorst

  • Like 1


Fired straight up. Changed oil n filter, scraped an inch of dust off the front window then drove it to the car wash for a birthday

spider webs hanging on

Bit of fuel past the rings is bugger all. She loves you and can't understand why you pulled the methanol injection and put it on a diesel ute. Probably just jealous. You know what Japanese Girls are like. Low km's one owner. Don't you dare cross me>:)
orly? 
You have my attention. Been sidetracked with the new front end, forgot I still need a zorst
Yeah dale I can get the magnaflows at cost no probs from super cat converters in Wangara. Is a quality product I put them on my skyline and sounds good.
Yeah dale I can get the magnaflows at cost no probs from super cat converters in Wangara. Is a quality product I put them on my skyline and sounds good.
I put these 3" magnaflows on the Nissan exhaust when I built it. What diameter would ragnor need? [emoji23] DSC_0217.JPGDSC_0182_1.JPGDSC_0216.JPG

well, the std pipe is a fkn wierd bit of kit with a massive traingular box section hanging off the back of the muffler - there to keep it flat at the back for the pillion I assume, but that is no longer an issue, so

I am thinking about 350-400mm in length, need to have an inlet to take 1 3/4' pipe. Gotta have a nice thick casing, as its going to have lugs welded direct to the case

orly? 
You have my attention. Been sidetracked with the new front end, forgot I still need a zorst
This is s 2 1/2" we put on little yanmars at work. If you get on the magnaflow website and get the part no. You want. No probs. DSC_0122_3.JPG



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...