Jump to content
SAU Community

Recommended Posts

11 hours ago, t_revz said:

 


Driving through cockburn always makes me Wellard

 

Thats even better than..."I would rather be Upper Swan than Innaloo"

On 7/17/2018 at 8:37 PM, pol1on1 said:

Yer oil dipstick popped out too much pressure in crankcase.
Not sure to why i had so much pressure to do that. But to fix the problem and do happy track dayz i think i need a catch can, larger sump, baffle kit for sump n cam cover, oil restrictor Maybe even a oil accumulator on top.
Then it might hit the track again but for now ill keep it straight drag pass.

Did loose about 4ltrs of oil from 6 hardly touching the dipstick that how known something went wrong as i was going up the shecane at 6k to 8k rpm i look down n noticed oil pressure at 2kgcm2..... at that point my car seat had me by the balls.
No knocking but at idle in gear lift the clutch put load on engine makes a small squeaking sound n crank pully has very slight movement . So thrust bearing has worn too much. :(

Sure it hasnt cracked a piston and uv had excessive blow by?

I bloody hope not but i think i might put a borescope on my to do list.

As for me day dreaming of a rebuild stroker kit money can buy a 2.8 or get a rb30 and same money buys a 3.2 or 3.4 [emoji57]
Now my biggest problem is finding time to wipe my own ass.
Got another baby 11mths apart
Happy dayz happy dayz [emoji6]

Mine cracked 4 ring lands and was not visible from above and spark plugs looked normal. The one piston that cracked from rings touching would barely be visible from above but the spark plug always looked oily

  • Like 1
I bloody hope not but i think i might put a borescope on my to do list.

As for me day dreaming of a rebuild stroker kit money can buy a 2.8 or get a rb30 and same money buys a 3.2 or 3.4 [emoji57]
Now my biggest problem is finding time to wipe my own ass.
Got another baby 11mths apart
Happy dayz happy dayz [emoji6]


30 is not same money. So much small shit has to be changed for the extra height you never think about. As someone who has done it, the torque is awesome, the initial install is far more involved than just bolting it in and Then you have the rego issues.

The 2.8 is less of a headache, it's still a 26 as far as rego care and everything that unbolted just bolts back up. If you have the time/money and want the 3.2/3.4 then yes, it's awesome but don't expect it to be as quick to do or the same cost.
  • Like 1
35 minutes ago, Hank Scorpio said:

Man, I was smashed after yesterday. It was loooooong!

I am hearing that!

After you left yesterday, we got stuck into the cake, and before we knew it, finished the glaze just before 11pm

The dog still hadn't moved as of 6.30am this morning.





3.2/3.4 then yes, it's awesome but don't expect it to be as quick to do or the same cost.


Yeah i was only thinking of the stroker kit only.
Isn't the height change the only problem was thinking that hypertune now make a low profile rocker covers.



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...