Jump to content
SAU Community

Recommended Posts

Hi guys,

These are probably questions that have been answered before, but I can't find them.

I'm looking at importing a 370GT SP and was wondering:

1. How easy is it to service and source parts for? Costly?

2. Is there an anchor point for a baby seat? NOT keen on a sedan.

Thanks so much for your help!

Nod

Link to comment
https://www.sau.com.au/forums/topic/457281-370gt-coupe-questions/
Share on other sites

1. Not too hard. For what its worth the 370GT is the same as the infiniti G37S which is sold in Australia and the USA. The 370GT also shares the same engine and driveline as the 370Z so another plus there. The in car entertainment is the biggest difference as its a japanese system (note: this can be changed to english for approx $2.5k) so if this ever has issues it would probably mean sourcing spares from an importer at this point in time.

2. Yes although I dont know what sort as I havent had to worry about a baby seat yet. I have seen some posts around about the anchor point needing am adaptor?? Someone else should be able to answer this with more info.

  • Like 1

I don't think it would get through compliance without baby seat anchor points. The V35 sedan needed a centre rear anchor point installed at compliance.

I can't imagine it will be easy to get a baby in and out of the back of a coupe though, but if it is important enough to have a coupe, I guess you will cope.

I don't think it would get through compliance without baby seat anchor points. The V35 sedan needed a centre rear anchor point installed at compliance.

I can't imagine it will be easy to get a baby in and out of the back of a coupe though, but if it is important enough to have a coupe, I guess you will cope.

Thanks guys :)

The GT will be my work car (the 2nd car). I just wanted to make sure for the odd occasion that I'll need to pick Little Miss up from pre school.

1. Not too hard. For what its worth the 370GT is the same as the infiniti G37S which is sold in Australia and the USA. The 370GT also shares the same engine and driveline as the 370Z so another plus there. The in car entertainment is the biggest difference as its a japanese system (note: this can be changed to english for approx $2.5k) so if this ever has issues it would probably mean sourcing spares from an importer at this point in time.

2. Yes although I dont know what sort as I havent had to worry about a baby seat yet. I have seen some posts around about the anchor point needing am adaptor?? Someone else should be able to answer this with more info.

Thanks for your help!!

Any idea of suppliers in Sydney and surrounds who do the conversion? Will the conversion mean GPS, radio and cameras will all still be functional with the 2.5K price tag?

re 2. No adaptations required for baby seats, and it has two anchor points. I have even had two set up in mine for the occasional family drive (both forward-facing seats). A slight pain being a two-door, but overall no drama.

re 2. No adaptations required for baby seats, and it has two anchor points. I have even had two set up in mine for the occasional family drive (both forward-facing seats). A slight pain being a two-door, but overall no drama.

That's good to hear, cheers!

As long as the kidlet is sitting in a seat, they are fine. My daughter is now 5 and she has been in the back of my 370GT Coupe for over 2 years. Make it work!!!

Certainly keen to make it work, it's just so much more appealing to me @ 25 y/o. If I were mid 30's I'd probably go the sedan but I'll cross that bridge when I come to it :)

Certainly keen to make it work, it's just so much more appealing to me @ 25 y/o. If I were mid 30's I'd probably go the sedan but I'll cross that bridge when I come to it :)

Hah! I went the reverse - from a '92 J30 Maxima for nearly 17 years until the V36 coupe took its place when I was 35. :P

  • Like 1

Hah! I went the reverse - from a '92 J30 Maxima for nearly 17 years until the V36 coupe took its place when I was 35. :P

:) I had a '93 J30 for 13 years.. but only changed to a V35 6MT sedan at 37 :).. now the kids are old enough to get themselves in and out of the car, I probably would go with a coupe if I could get a reasonable figure for my sedan.

As for the OPs choice.. go for the coupe.. one day practicality will take a higher priority like it did for me.. until then.. enjoy it!

Edited by sonicii
  • Like 1

:) I had a '93 J30 for 13 years.. but only changed to a V35 6MT sedan at 37 :).. now the kids are old enough to get themselves in and out of the car, I probably would go with a coupe if I could get a reasonable figure for my sedan.

As for the OPs choice.. go for the coupe.. one day practicality will take a higher priority like it did for me.. until then.. enjoy it!

My thoughts exactly :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...