Jump to content
SAU Community

Charcoal Canister Re-install

Philr32

By Philr32,
in General Automotive Discussion

 Share

Recommended Posts

Philr32 Proficient

Philr32

Posted
Posted

So I pulled out the charcoal canister on my RB25 DET now I need to put it back in to pass EPA testing. Can anyone explain or show me a pic of where the 3 hoses run? I can't remember for the life of me.

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/457881-charcoal-canister-re-install/
Share on other sites
Dobz Experienced

Dobz

Posted
Posted (edited)

The top line on the little diaphragm goes to maniflod vacuum, the one below goes to throttle body and the bigger is from tank.

What's the thinking behind taking out the canister to "tidy up"? Does it cramp your street cred and make you a laughing stock?

Apart from doing what it's supposed to which is stop raw fuel vapours getting into the air it actually saves you money. Those fuel vapours aren't just getting wasted, your engine actually burns them to power your car. Magic isn't it?

Imagine the money you could save on fines too.

Edited by Dobz
Trex Grand Master

Trex

Posted
Posted

He has already been served in another thread where he didn't want to listen and still removed it.

also the info on how to remove and replace has been covered many times on sau, with pictures for those who need illustrated guidance.

  • Like 1
Philr32 Proficient

Philr32

Posted
  • Author
Posted

Firstly, it got me +10 street cred. I appreciate the response and understand stupid shit like this is frustrating but you didn't need to be a smart arse.

Secondly it wasn't me that "got served" in another thread.

Lastly, thanks for the help, I got it sorted now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...