Jump to content
SAU Community

Recommended Posts

Hey guy's

My 33 is up the duff missing a little on idle and alot while driving on and off boost.

Quick idea of the build

Series 2 gtst

Rb25

Gtx3076

Haltech plug and play, wideband kit

740 side feed injectors

Exhaust, front mount

Everything to support 300kw

In the last few weeks its starting playing up, since chasing the miss ive done the following

Swapped cas

Swapped coolant temp sensor

Coilpacks swapped

Coil loom swapped

Injectors flowed and tested

Vacuum lines checked

02 sensor for wideband replaced

Compression test was ok

Two sets of plugged tried, gaps checked

Cleaned aac valve

The only thing that stood out, the fuel pump has a aftermarket relay that was melted but the fuse wasn't blown, the wiring is all good

Ive since replaced the relay setup, but no difference. Could my fuel pump be causing the problem?

So over it, please help!

Hey guy's,

Thanks for the responses.

Checked all cooler pipes cant find a leak, also replaced vac lines

Compression test was good. Approx 150 across all 6

I only have a short trip to work and I've noticed that once the cars warm the misfire goes away and it drives perfect again?

What controls the cold start, maybe its related

Thanks in advance

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...