Jump to content
SAU Community

Recommended Posts

I have a R32 skyline GTS-T and at slightly above idle there is a high pitched whine coming from the engine bay that I can't find the source of. Basically it's like a high pitched tone that usually will switch to a lower pitched tone then go away, there is no gradual change of it it's high then low then nothing. The tone doesn't happen when the car it at any other RPM than slightly above regular idle. Like the car will temporarily have a high idle then will go to the normal idle rpm and it will go away.

Any ideas on what I should look for? The car otherwise is driving fine and there are no noticeable issues.

edit: i realize that the past two times i drove the car the idle has been very high at near 1500rpm and I found some threads on that like this one:

http://www.sau.com.au/forums/topic/227514-how-to-adjust-tps-and-idle-on-r32-gts-t/

Could failed TPS cause this noise as well? Don't see any mention of that.

Edited by Kanaric
Link to comment
https://www.sau.com.au/forums/topic/458377-high-pitched-whine-only-at-idle/
Share on other sites

I was wrong about the 1500 idle, what i get for posting from work and memory alone. It idles at 1100.

So I tested the TPS and it is fine, that is not an issue.

I borrowed a Power FC that has a stock tune and when you do the pre sets it idles fine at 700rpm. Regular ECU it idles at 1100. Weird. Anyways it seems like this is a separate issue.

Noise might be a belt?

I can't find it right now but would it only be two different tones like that if it were? Like it's a constant consistent flat tone almost like a musical note no whirling sound or changes in pitch until it then changes to a lower pitched one for some time then goes away. I did some hard driving over the weekend and it was staying high pitched and not going away until the car cooled down. It's late here now but tomorrow i'll try to get it to be consistent like that so i can try hunting for it again.

Edited by Kanaric

So,

High idle and high pitch squeal when driving?

Boost leak?

Maybe it is, here is a video of the sound.

The thing is though with a boost leak i should hear it get louder at higher rpms, am I right? I don't hear anything at higher rpm than idle. Even if I just use light throttle.

Edited by Kanaric

Auxiliary belt pulley bearings maybe. Sometimes when they are on their way out they will whine a bit while at idle but usually won't hear anything at higher revs. Put your ear up to the pulley as close as you can and you might be able to pin point if its coming from there or not.

Auxiliary belt pulley bearings maybe. Sometimes when they are on their way out they will whine a bit while at idle but usually won't hear anything at higher revs. Put your ear up to the pulley as close as you can and you might be able to pin point if its coming from there or not.

Ok, i'll check that out

Found the source of the sound, it's the alternator. Just have to figure out if it's the belt, pulley, or whatever.

I think the pulley is causing problems because since i've had the car it has a pulley that is wider than it should be i'm guessing previous owner put one from another car on it for whatever reason. Only problem is I can't find one that isn't part of some expensive underdrive pulley kit. Anyone know where I can get one?

Edited by Kanaric

I went to a bosch alternator that has the fan on the front of it rather than in the casing. Has a similar whine but sounds sexier, like a jet engine idling, i like it. Once the revs go up you can't hear it anymore, i just put it down to the fan audibly moving air through thr alternator now. So anyway your alt's not a new bosch one is it?

Usually when alternator makes that sound its the bearings in it.........needs a rebuild.

Get it checked but if it needs rebuilding best do it before armature is damaged.

The alternator seems like a new item but I bet it was overrevved or something by this non-stock pulley when I was at autocross....

Mine's probably more a whistle sound that a whine actually. They're cheap enough, if yours does need replaceage

I'll have to see how to wire this. I am not very electrically inclined.

Replacing alternators is pretty much plug and play. You remove the old one, install the new one and plug in the wires. If the plug pack doesn't fit then you may need a plug supplied with the new alternator or cut the wires and crimp on spade terminals. Just take note of how it comes apart and do the same when putting it back together.

Or take it to an auto electrician.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...