Jump to content
SAU Community

Paying It Forward: R32 Edition

GSX-R35

By GSX-R35,
in United States

 Share

Recommended Posts

GSX-R35 Community Regular

GSX-R35

Posted
Posted

Hello ladies and gentlemen. If you own an R32 here in the US you probably already know that it's not exactly the easiest car to own and maintain largely because of a lack of widespread resources and info here in the land of apple pie and easy gun ownership. I know from my own experience that I would have had a much harder time getting my R32 GT-R registered if it hadn't been for the assistance of some wonderfully helpful JDM car owners here in my state of Arizona. Since then I've started my blog 23gt.blogspot.com to help spread info about JDM car ownership in the US to prospective and current owners but I can't possibly answer every question of course.

So, here's what I'd like to do – if you own an R32 or other JDM imported car in the US I'd like you to contact me if you'd be willing to help others out if they have questions about their own cars that they are importing or have already imported. Since registration and ownership situations can vary greatly from state to state I'd like to compile a list of owners who can help someone out if they have trouble, preferably someone who lives in the same state or at least in the same part of the country.

There would be two situations you would probably be called on to help:

  1. Someone has a car on the way or already here but needs help getting it registered.

  2. Someone needs help finding a good shop locally to get their car inspected or fixed.

I may contact you to help with other issues but only if it's appropriate.

Email would be the preferred contact method but if you have an alternate way you'd like to give (such as PM on a forum) that'd be great too. What would basically happen would be if someone contacts me through my blog or a forum I go to, or if I see a forum post asking for help you would then get an email from me asking if I can share your contact info with that person and extend an offer to help them out. I'd just like you to share your knowledge, I don't expect you to do anything financial or anything like that and won't hold you to a standard – just the fact you're willing to help another person out is enough.

So what'll happen would be something like this (this is just an example mind you): I see someone on SkylineOwnersAnonymousAndOnlineDating.Com who posts “Hi! My name is Stacy and I'm an ex-porn star and I just imported an R32 Skyline but the DMV won't let me register it even after I flashed the clerk! Helps me plz!”

You'd then get an email from me saying “Hey, have you seen this girl Stacy with the R32? She's hot! Here's some links to her vids! Oh., and you wanna give her advice on getting her car registered?”

Only after you give me the okay would I then share your contact info, discreetly by the way so you don't get more emails from Nigerian princes and male enhancement vendors (I won't just post your email publicly – I'll either post mine and ask them to contact me or send a PM).

So if you'd like to participate in this charitable endeavor and help the Stacys of our country then please contact me by PM, email me at 23gtblog(at)gmail.com, or post in this thread how I can contact you. Here in Arizona, I have someone already on board besides me but more people would be appreciated of course. I know SAU doesn't have a lot of activity from US owners right now but I hope I can get some interest from here as well.

Thank you very much,

Oliver

P.S. Please participate only if you have a 100% legally imported JDM car. This isn't because I have anything against quasi-legal cars but it's for your safety and the other person's. If your car isn't quite legal then you probably shouldn't advertise it by sharing your contact info with others. At the same time it's not good if prospective owners get advice that's not quite on the up-and-up. Thanks.

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/458553-paying-it-forward-r32-edition/
Share on other sites
  • 2 months later...
GSX-R35 Community Regular

GSX-R35

Posted
  • Author
Posted

Genius post, I'm located on the east coast of the united states and currently trying to source an R32 GTR. I've bookmarked your blog in preparation for what to expect!!!

I hope you find the blog helpful then in your search and subsequent ownership! :)

  • 1 month later...
B-Turbo Enthusiast

B-Turbo

Posted
Posted

I recently have purchased a skyline. I live in New York.

I bought my car from a dealer in Richmond, VA.

www.Japaneseclassicsllc.com

Since I got my car from this dealer I did not have to do any importing or all that jazz. I simply went emailed them to get the car, called to make an appointment for a test drive, and went down to seal the deal. This was in no way different then buying any other car.

The guys I got my car from are a fantastic group of people. I have nothing but good things to say about them. The process was simple and stress free. It was a pleasure to do business with them. They even work with a financing company!

If anyone wants other info just pm me.

?

  • 5 months later...
  • 2 weeks later...
HarrisRacing Proficient

HarrisRacing

Posted
Posted

Patrick Harris

In Lafayette Louisiana.

My brother owns a shop in Scott Louisiana about 3 minutes off of I-10. I'm SURE he or I could help fix your skyline after doing mine!

His shop is Harris Automotive Services, Scott, LA.

  • 2 years later...
  • 4 months later...
  • 1 month later...
Hcr32typem Enthusiast

Hcr32typem

Posted
Posted (edited)

I'm Dan and I have a 92 GTSt Type M from Connecticut. Mechanic by trade and spent a lot of years in the performance world. Still learning about these cars but I'm always happy to jump on and help if someone needs the assistance!

U4KP6sw.jpg

My car for reference! In the process of doing a "Type MR" conversion which was an extremely limited run of GTSt made by the Kanagawa Dealer for the 35th Anniversary of the Skyline. It was essentially a standard GTSt with a GTR grille, hood and rear wing with a special badge on the trunk but otherwise unmodified. Apparently it was limited to 200 cars.

Edited by Hcr32typem
  • Thanks 1
SeanR32GtSt Community Regular

SeanR32GtSt

Posted
Posted
Just now, Hcr32typem said:

I'm Dan and I have a 92 GTSt Type M from Connecticut. Mechanic by trade and spent a lot of years in the performance world. Still learning about these cars but I'm always happy to jump on and help if someone needs the assistance!

Ever had an issue with the car not wanting to HOT start? After some driving turn car off, go into store come back and start it and have to hold the throttle down for few seconds to keep it running. 

Hcr32typem Enthusiast

Hcr32typem

Posted
Posted (edited)
49 minutes ago, SeanR32GtSt said:

Ever had an issue with the car not wanting to HOT start? After some driving turn car off, go into store come back and start it and have to hold the throttle down for few seconds to keep it running. 

Actually I had a similar problem. Itd cold start fine but then hot start like crap. 

Is your car running very rich? Do you smell excess fuel when it does start?

My issue ended up being the fuel pressure damper at the front of the rail (read: against the firewall. RB rails feed from the firewall and exit through the front and the fuel pressure regulator). The diaphragm had failed and fuel was being forced through the vacuum lines and into the intake before the throttlebody.

 

R19b1qZ.jpg

Pull this line off and see if there's an fuel in it.

Edited by Hcr32typem
SeanR32GtSt Community Regular

SeanR32GtSt

Posted
Posted
22 minutes ago, Hcr32typem said:

Actually I had a similar problem. Itd cold start fine but then hot start like crap. 

Is your car running very rich? Do you smell excess fuel when it does start?

My issue ended up being the fuel pressure damper at the front of the rail (read: against the firewall. RB rails feed from the firewall and exit through the front and the fuel pressure regulator). The diaphragm had failed and fuel was being forced through the vacuum lines and into the intake before the throttlebody.

 

R19b1qZ.jpg

Pull this line off and see if there's an fuel in it.

Check hose after engine is hot or cold?

Hcr32typem Enthusiast

Hcr32typem

Posted
Posted (edited)

Eitherway, you should either have a small puddle or you'll smell fuel residue

Mine youd have to crank the engine and put the peddle to the floor to "catch" the engine or it would die and you have to crank it for an extended period (15 seconds or so)

Edited by Hcr32typem

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • bcozican
      R32 Gtst - Track Car

      By bcozican · Posted

      Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...