Jump to content
SAU Community

Recommended Posts

Hi guys,

I bought these back when the group deal for the big brake upgrade was on, these are still new in the box, they are the 356mm disk with the 8pot piston caliper for the front of the car. They come with the dog bone for the R32/33 GT-R.

Street compound pad provided by D2

You need to run minimum 18 inch wheels.

PRICE: $1800 ONO. Buyer pays for postage. Brakes are in Padstow NSW.

Link to comment
https://www.sau.com.au/forums/topic/458903-d2-8-pot-356mm-brake-kit-r3233-gtr/
Share on other sites

Hi guys,

I bought these back when the group deal for the big brake upgrade was on, these are still new in the box, they are the 356mm

You need to run minimum 18 inch wheels.

They also fit 17" wheels with bigger clearance like TE37's etc

Which part requires clearance when used with 17" wheels? Is it the rotor or the caliper? If these can fit my car, I am very interested. Can you do a bodged up number test for me, put the caliper over the rotor and see how far the caliper sits from the rotor. ie the part that will have clearance issues. So essentially to the external most diameter of the caliper on the wheel and to the spokes of a rim. Just rough. I am at Parramatta and can pickup.

Which part requires clearance when used with 17" wheels? Is it the rotor or the caliper? If these can fit my car, I am very interested. Can you do a bodged up number test for me, put the caliper over the rotor and see how far the caliper sits from the rotor. ie the part that will have clearance issues. So essentially to the external most diameter of the caliper on the wheel and to the spokes of a rim. Just rough. I am at Parramatta and can pickup.

What wheels do you have?

The smallest wheels I have are TE37 17x9 +0 and the caliper sits a bit over 10mm from the inside of the wheel (the spokes have plenty of clearance).

Inter Milano 17" wheels. I've uploaded a couple pictures of my fitment with the standard brakes.

http://i.imgur.com/cJtKNpm.jpg

http://i.imgur.com/OJ4iU4Z.jpg

Just by looking at the photo's I can tell you they won't fit. The caliper won't clear the inner diameter. As mentioned previously, a big clearance, forged race rim like TE37, LMGT4 in 17" will clear.

edit:

This is a photo of mine.

IMG_0343_zps9670de22.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...