Jump to content
SAU Community

Recommended Posts

A friend of mine years ago ducted his R32 N/A intake into his cabin. Into his cabin. His thinking was when he turned on his A/C, the engine would breath in the cold air, get some performance, he ran without a filter as there was no need for one. Spiders and roaches would be squashed and burned if they'd ever get into the intake. But guess what? After the initial shock he got from insane intake noise from the startup rev, instant regret 30 seconds of driving it hahahaha, and of course, he had to return everything back to the way it was, but with a large hole in his firewall.

There are flexible stainless steel piping available, you could get the correct piping diameter with some coupling for your setup. No need to worry about piping angles. See here:

http://www.summitracing.com/int/parts/wlk-49033/overview/

There is a panel under the stock air filter, if you would take a look at it, there is an outline for turbo piping. You can drill a hole there for either piping your pod, or to let ambient air in. There is a tutorial I think somewhere in the forums.

Do whatever you want to your car, the itch of not doing it when you wanted to do, can turn into a rash. Just don't get hurt or have anybody else hurt. And of course, be prepared for "I told you so, comments." Goodluck buddy.

  • Like 2

haha, would love to see a down shift backfire through the intake. that would wake him up.

i actually wanna see pictures of that.

Sorry mate, there were no photos, this was like in 2001. We didn't even have digital cameras back then, just the film ones. On this island on that year, internet was just starting to get installed, heck, we still use dial up in many homes. I have photos of another buddy of mine somewhere, I just need to find it, where he installed a 6 foot intake to his Toyota Levin. The same piping as the flexible intake link I posted, but at 2.5" diameter. It was way cheaper back then, now it costs twice as much. I'll post it tomorrow as I am logging off from work, such fun times haha.

A friend of mine years ago ducted his R32 N/A intake into his cabin. Into his cabin. His thinking was when he turned on his A/C, the engine would breath in the cold air, get some performance, he ran without a filter as there was no need for one. Spiders and roaches would be squashed and burned if they'd ever get into the intake. But guess what? After the initial shock he got from insane intake noise from the startup rev, instant regret 30 seconds of driving it hahahaha, and of course, he had to return everything back to the way it was, but with a large hole in his firewall.

Reminds me of the guys who used to fit DCOE Webers onto their minis. The intake trumpets used to come through the firewall into the cabin. Then again, intake noise was half the reason people bought Webers, and in those days a Mini was far from quiet anyway, so the Weber conversion was nothing but win.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...