Jump to content
SAU Community

Recommended Posts

I think I would keep a watch out for JDMs in Australia too. As much as Aussies preferring to sell to fellow Aussies, we've been blessed with quite a few cars which have been modified already and modified well.

Some of the tuners are very good at what they do here.

And many owners are picky.

Mind you, the bad ones can be sorted out in various ways too.

I think I would keep a watch out for JDMs in Australia too. As much as Aussies preferring to sell to fellow Aussies, we've been blessed with quite a few cars which have been modified already and modified well.

Some of the tuners are very good at what they do here.

And many owners are picky.

Mind you, the bad ones can be sorted out in various ways too.

I know I'm going to be keeping an eye on R34s in Australia when the time comes :)

In case anyone here is curious about the crap we have to put up with on the US forums here's a prime example:

http://www.gtrlife.com/forums/topic/141298-1991-bnr32-gt-r-v-spec-ii-n1-purchase/

So basically this guy is claiming he's bringing in a "1991 R32 GT-R V-spec II N1" to the US. For one thing the first N1s were sold in June 1991 so they won't even be legal until June 2016. Second there is no such thing as a 1991 V-spec II because the V-spec II wasn't made until 1994! The V-spec was introduced in 1993 because of Nissan's race victories - hence VICTORY spec.

When called out he then says he's got a "prototype" car which he believes is #57 out of the 228. Funny how he knows that since the N1s weren't sequentially numbered unlike the Nismos.

Then he says he can get R34s legally too because he "knows people". And that he can get a "Nismo R34" but it's NOT a Z-tune because he says he can get an "M-tune and M Nur". Funny how I've never heard or can find any evidence of an "M-tune" just the M-spec and M-spec Nur which wasn't a Nismo model and had changes meant for more luxury versus the V-spec.

The troll is strong with this one.

  • Like 1

He's an oxygen thief!

Bob.

That's a good way to describe him. Oxygen theft may not be the only thing he's doing that's not legit given how he keeps saying he has "connections" lol.

Australia is not immune to such idiots. Mostly, car club members sort them out.

I'm sure all countries have their share of morons but as far as Skylines go the US seems to breed a lot of them because of all the misinformation that's spread since they were deemed illegal. This particular thread is shockingly bad though lol.

lol, I love these kind of people.

Fools and pathologic liars can be very amusing lol.

So does the illegality of Skyline GTRs encourage intrigue from obtuse upstarts?

I'd say yes. Usually there are two types of threads - the ill-informed who honestly don't know what they're getting into and then there are the know-it-alls who claim they know better than people who actually own these cars and have been at it for a while. It's pretty common to see both but the latter are especially stupid because they usually act like big shots with all the answers but then disappear when push comes to shove and proof is asked for.

Here's another example from skylineowners.com. It starts with an ill-informed guy who obviously doesn't know about the legal status of the R33 then comes along another guy who claims all the forum posters don't know crap (including a guy who does own a LEGAL R33 ironically):

http://www.skylineowners.com/forum/186-usa-members-forum/262938-how-much-nissan-skyline-r33-worth.html

You also get a lot of companies making false claims about being able to bring in Skylines legally, some stories of which are mentioned here:

http://www.nicoclub.com/archives/the-facts-about-nissan-skyline-importation-into-the-united-states-5.html

I don't know anything about them. I guess it's up to me to find out instead of living in a closet. :)

I was told by the interviewer that there's a large following overseas and mostly about JDM.

I've just been interviewed by SpeedHunters.com

Apparently there are a few followers in the US.

Do gtr owners you know of, follow that site?

How do you find SAU?

Pros and cons?

Wow, you're lucky to be interviewed by SpeedHunters! They're only one of the most popular modified car blogs in the US lol. They have some really awesome features including some great articles on Nismo and the Omori Factory. Their main man in Japan Dino Dalle Carbonare is a Skyline fan himself and owns an R34 GT-R. Lots of GT-R fans follow that site and they often feature GT-Rs. Every year they do a feature on the Nismo Festival and the R's Meeting.

As for how I find SAU - I think it's a great site and is the easiest to get knowledge and advice from of the Skyline forums I go to. One thing I've always found odd since I came here is that there's a separate R35 section but no specific Skyline section - just the "Vehicle Specific Discussion" area. It's not a problem but just seemed different to me from other forums. Also compared to other forums SAU hasn't seemed to attract a lot of American members so far compared to other forums despite the surge in R32 ownership over here - which is a shame since as I said I've found this site more helpful than others I've been to. I think it may have to do with the name. I notice the UK-based Skylineowners.com gets a lot more American activity in its forum and it may be that people gravitate toward it because the name doesn't mention any nationality while Skylines Australia may give the impression it caters to Australian owners only - I know that's not true but it may just be the impression people get especially when they do a search online for Skyline forums.

I love reading Speedhunters' features like these ones for Omori Factory and the R34 Clubman Race Spec. The pictures are gorgeous!

http://www.speedhunters.com/2014/10/inside-nismo-a-day-at-omori-factory/

http://www.speedhunters.com/2014/09/gtr-for-the-street-and-track-by-nismo/

They just ran their latest R's Meeting feature a couple of weeks ago and the pictures are delicious :worship:

http://www.speedhunters.com/2015/09/gt-r-indulgence/

Edited by GSX-R35

I love reading Speedhunters' features like these ones for Omori Factory and the R34 Clubman Race Spec. The pictures are gorgeous!

http://www.speedhunters.com/2014/10/inside-nismo-a-day-at-omori-factory/

http://www.speedhunters.com/2014/09/gtr-for-the-street-and-track-by-nismo/

They just ran their latest R's Meeting feature a couple of weeks ago and the pictures are delicious :worship:

http://www.speedhunters.com/2015/09/gt-r-indulgence/

If you haven't already discovered it, another great read is Aki's blog. It has good enthusiast info from a lot of Japanese articles, sources and resources, and discusses all the skyline GTR models.

http://www.r33gt-r.com/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...