Jump to content
SAU Community

Id1300s/ Short Injectors To Neo Manifold.

Huzqld

By Huzqld,
in Engines & Forced Induction

 Share

Recommended Posts

Huzqld Enthusiast

Huzqld

Posted
Posted

Hi, got some id1300s for my neo, but am having trouble getting them to fit. See pic (Plug base fouls on the manifold).

I was going to just grind a bit off the manifold but too much needs to be taken out.

Has anyone fit these type of injectors to a normal rb25 or rb25neo manifold.

On my old injectors the plug was more to the top.

post-78438-0-49129300-1442307488_thumb.jpg

89CAL Grand Master

89CAL

Posted
Posted (edited)

They need spacers. These are pretty readily available. Those look like they are just the injector on its own. Pretty sure they need the smallest of the spacers, but top feed injectors in stock manifolds arent my forte

Scotty on here should be able to help you out. He will probably show up in this thread sooner or later

This is from a quick google search, bottom of the page. Click here

Edited by 89CAL
Huzqld Enthusiast

Huzqld

Posted
  • Author
Posted (edited)

Cheers mate,

I have the height adapters for them to make them full length but they and most spacers go on the top of the injector?

Which doesn't help with the issue I'm having

Spoke to Scotty today, i may have to get him to make some spacers to go under the injector if i cant find anything else

Edited by Huzqld
89CAL Grand Master

89CAL

Posted
Posted

Hmmmm I thought they made them for the bottom of the injector as well. But I may be wrong. They definently look shorter then my 1000cc's

I had a page with the pics of all the adapters etc attatched but cant find it. I may be talking complete rubbish though, Scott would know better then me

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

on a non neo you are required to fit an injector boss, which is just a metal spacer/o ring combo allowing the injector to be seated correctly.

Please don't go grinding anything.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

That VPW fitting should work, I can get a hold of one and check it fits if you like, before you buy them, and work out what top spacer you will need too, as that needs to shortened by the same amount.

Huzqld Enthusiast

Huzqld

Posted
  • Author
Posted

Thanks Scotty that would be great. Since I've organised the tuner for Friday it's all turned into a bit of a rush.. So I need to have them ordered early today.

If you've got one you can get hold of to check that would be awesome.

If I can't sort the top spacers out today I'll just space the rail up and sort that out after the tune

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Thanks Scotty that would be great. Since I've organised the tuner for Friday it's all turned into a bit of a rush.. So I need to have them ordered early today.

If you've got one you can get hold of to check that would be awesome.

If I can't sort the top spacers out today I'll just space the rail up and sort that out after the tune

I just had the wholesaler flow test a 1650 shorty and you may have a problem with that idea. With that lower extension on the cone sprays out wide enough to hit the edge. It would have to be modified with a 45 degree chamfer, but this leaves the raw alloy exposed to the ethanol which is not a great long term option. It may get you by until you find a better solution though. Let me know if you want me to sort something out for you, I can probably make something up today and send the top and modified bottom extensions express.

Huzqld Enthusiast

Huzqld

Posted
  • Author
Posted (edited)

Hey Scotty

I spoke to efi hardware, they have some adapters they Say won't affect the spray pattern, (they said the others do like you said)

and then I just run half height extensions on the top to make them full length

So hopefully that will work

*sorry short extensions on top

Edited by Huzqld
scotty nm35 Grand Master

scotty nm35

Posted
Posted

Hey Scotty

I spoke to efi hardware, they have some adapters they Say won't affect the spray pattern, (they said the others do like you said)

and then I just run half height extensions on the top to make them full length

So hopefully that will work

*sorry short extensions on top

You don't want full height, you need 3/4 height for the neo.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Man, this is getting crazy, an adapter on each end, full length, the injectors will move around too much for my liking... You really don't want them popping out while driving, they need to be firm so make sure you keep the rail height down to minimum.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      33 GTR Broken front wheel knuckle

      By GTSBoy · Posted

      That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • R32 TT
      33 GTR Broken front wheel knuckle

      By R32 TT · Posted

      Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • MBS206
      33 GTR Broken front wheel knuckle

      By MBS206 · Posted

      Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • GTSBoy
      R34 auto to manual conversion help

      By GTSBoy · Posted

      The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
    • Manur33
      R34 auto to manual conversion help

      By Manur33 · Posted

      Hi, i’m converted my r34 4dr auto to manual but need help with gearbox wiring. There are bunch of wires no idea which one for speedo drive, neutral, reverse can anyone help me. IMG_6860.mov
×
×
  • Create New...