Jump to content
SAU Community

Recommended Posts

They look just like mine (not that I know if mine are real or fake). The only thing I can think of is the engraved writing, and I'm sure if somebody wanted to make a fake that wouldn't be too difficult to copy.

hNmqAes.jpg

Link to comment
https://www.sau.com.au/forums/topic/460175-nismo-lmgts/#findComment-7614091
Share on other sites

Doesn't Edward Lees sell LMGT stickers to stick on the inside of the barrel and then recommends to spray coal tar on them for that genuine look?

Btw, are there not any residue/genuine stickers still there on the barrels? Maybe they've been sandblasted and repainted huh?

Link to comment
https://www.sau.com.au/forums/topic/460175-nismo-lmgts/#findComment-7614184
Share on other sites

Are the rotas heaps heavier though? I would say they probably weigh around 8kgs if I had to guess.

Mine don't have the "made in japan" stamped on the side of them like yours do, or the "forged monoblock" part. Is that a give away does anyone know?

I'm asking because they have been for a bounce over a curb and need to be fixed, but no point in fixing them if they are just rotas.

Link to comment
https://www.sau.com.au/forums/topic/460175-nismo-lmgts/#findComment-7614271
Share on other sites

re: weights, this attachment is the nismo info pdf of lmgt4 sizes/costs & includes the weights. Not all sizes that were available are listed but most are.

Can also be found at the below location:
http://www.nismo.co.jp/en/products/competition/wheel/pdf/aluminum01.pdf

aluminum01.pdf

Link to comment
https://www.sau.com.au/forums/topic/460175-nismo-lmgts/#findComment-7614303
Share on other sites

Thanks guys,

So yeah it looks like they might be rota's from everything you've said. Considering I got them given to me, it doesn't really matter too much.

They have a crack in them each and I actually like the look of them. Do you think they'll be worth fixing? I had a look and new rotas are about 1k new anyway.

Like Dyl33 said, I'm sure many people "hate" them (and don't get me wrong I can see why especially if you do have genuines). But i'd rather pay 1k than 4k for something someone has to look closely at to tell the difference at this point.

Link to comment
https://www.sau.com.au/forums/topic/460175-nismo-lmgts/#findComment-7614340
Share on other sites

Like Dyl33 said, I'm sure many people "hate" them (and don't get me wrong I can see why especially if you do have genuines). But i'd rather pay 1k than 4k for something someone has to look closely at to tell the difference at this point.

They're probably be fine for putting around on smooth roads, but when you start smashing through potholes/ripple strips, metallurgy comes into play a lot more than design.
Link to comment
https://www.sau.com.au/forums/topic/460175-nismo-lmgts/#findComment-7614452
Share on other sites

Well I'm not gonna be driving it in the city so country roads aren't smooth. But I'm not gonna be taking it on race day. The guy I was taking them to has "assured no rim leaves without being 100% roadworthy" so I would think they would be OK for general driving. What you guy reckon?

Link to comment
https://www.sau.com.au/forums/topic/460175-nismo-lmgts/#findComment-7614457
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...