Jump to content
SAU Community

Recommended Posts

I've been looking at different ways to get myself an R34 GT-R the last few months after selling my R33 GTS-4 while sorting out funds. My options seem to be either buy locally by private sale, or dealership (seems hard to find this way), or through importing (have been looking at rough quotes from iron chef, and genuine imports in NSW, and carizma, and at previous 34 auctions on prestige Motorsport in WA).

Buying locally seems to be much higher in price, and more so through dealerships that stock imports, may have questionable condition, history, and kms, while importing seems a bit more cheaper (more money for mods) if I am patient, which I'm fine with.

Just wanted some more up to date feedback than what I've found on the forums so far. I'm not too fussy on the type of GT-R, I'd love a midnight purple II though but am open to other colors, not fussy on kms (120,000kms would be fine for example), just has to be in a normal condition and fairly stock.

Any thoughts on this would be greatly appreciated, as I've never imported before. I've only bought my last two R33's as the second owner in Aus. Thanks!

If you're buying a GTR that's already landed in Aust I'd preferably buy one through a car club on Fb or SAU itself. If a member here doesn't wish to fix up problems, he's more likely to sell it through gumtree or carsales.

If you're trying to source it from Japan, your importer will try and procure one from private treaty or at an auction house. Some auction houses attract better or poorer/cheaper cars than others. Some importers may have a man on the ground to do a physical inspection as well as pore over the auction sheet. Some Japanese owners may set too high a reserve and the car may get passed in only to reappear a couple of weeks later.

Doing your maths:- Add about AUD$12,000 to your Yen Bidding Limit and then compare with what you can procure here in Aust.

Well, you do get to look at the car in person if you go local, but so many of the local ones are complete rubbish. Odometer windbacks, accident damage, other issues. And most sellers (particularly dealers), tend to deny having the import paperwork with the car. If you import, it's cheaper, you get more choice, and you get the paperwork with it. (Assuming you go with a proper importer like Iron Chef or J-Spec).

+1 for importing.

I guess it all depends on what you find, but as Terry said the SAU members who sell their cars do look after their cars and are more genuine when it comes to these things.

I was looking to import one myself however I really wanted to see the car in flesh. I've found the car and I just put a deposit on a 2000 34-Vspec, which has done 67,000 (auction sheet 3.5 and de-reg cert - proving the kms) Nice mods and has been going to RacePace since 2008 for mods and servicing.

Just a matter of finding the right one - take your time and I'm sure you can find something local.

Thanks for all the great advice guys, I will definitely look on SAU for any that catch my eye and at a good price, and will probably write off carsales/gumtree and dealerships as an option just due to not being able to trust their history unless they have full paperwork like dereg kms and service history.

As for importing I will most likely go through iron chef to try look for one at a good price seeing as I'm not really in a hurry to get one, I have a japan trip next month I'm saving for but will use that to find some 34R parts while I'm there. If I find an R at a steal of a price it'll be worth the wait. Iron chefs rep is also really good from what I've read on the forums, plus my own contact with them was really friendly

Hi OP,

I speak from experience for this one. I have imported a GTR specifically but I have gone through the process.

You won't get a great indicative pricing on how much it'll cost you landed and complied. There are a lot of things that come into play.

It also depends on how much you're willing to spend here. You won't be able to feel the car, nor test it. All you've got are a couple dozen pictures, an auction sheet and the company you have hired to help you with the process. Honestly though, you might find that it can be a hit and miss situation, you'll find awesome cars, bid too low and lose it to another buyer or bid too high for a car that doesn't have all the goodies you wanted in the first place.

If you have a good idea of what you exactly want then a company like Iron Chef Imports etc can help you find something equivalent or close to it. Especially for a GTR which doesn't come around too often, you might spend months looking for one that will suit you.

Then after you pick your car, you'll have to go through the import and compliance process which can take a month or two as well, depending on the amount of work that needs to be done to the car and the RAWS queue. During the compliance stage, the car has to be returned to stock for inspection so this may set you back some dollars if the compliance shop isn't well equipped etc. Once again, if you find a reputable company for imports I'm sure this won't be too much of a problem.

All in all, you pay for what you get most of the time. If an R34 GTR cost you $35k to import then something is definitely wrong with the car, whether it be R/RA conditioned or just mechanically crap. Find a reputable agent to help you import, one that has the right contacts for what you're trying to import and you'll be fine!

Good luck!

I imported one a few months ago through J-Spec. I think I was a little more specific than you (I wanted blue, under 60,000km, had to be V-Spec or better and grade 4 or better, preferably 4.5).

Long story short I found exactly what I wanted, blue grade 4.5 V-Spec with 37,000 original km's complete with paperwork and entire service history since new. It cost me about $56k inclusive of everything except registration/insurance. The dollar was much stronger vs the yen when I bought though, from memory I got around 95 yen per Aussie $. Either way, if that same car were selling locally the person would probably be asking 65k+ (judging by what's on car sales now).

Oh and it's almost completely stock, including the original factory tyres on the original rims. Lol. Safe to say I'd import again no worries.

  • Like 1

You can't use recent auction sales or landed prices in AUD as any sort of guide, the exchange rate has dropped by 15% in the last 2 months. Simply put, even if you can find a 35,000 R34 you will have to pay more like 45,000 for it this now.

At the moment, every car in the country came in under a much better exchange rate, so we are probably in one of those unusual times where you will get better value locally than importing.

Thurrzor, you have to be very careful with the lower grade cars (3.5 for example). There is an enormous condition gap between a 3.5, 4 and 4.5 and remember it's generally down to the inspectors opinion. When I was buying, I saw a V-Spec II with 18,000 genuine KM that was rated grade 4, however it had so much rust that it wouldn't have passed compliance here in Aus, rendering the car useless and unregisterable.

A lot of inspectors at auction houses won't pay attention or comment on rust. You'll find that any good importer like iron chef or j-spec will simply tell you they won't bid on a car with those sorts of issues regardless how much you beg. I can't imagine anything worse than getting a grade 3.5 car here that won't comply to Australian standards, even if you only paid 25 - 35k.

Edited by ADP91

Hmm you're right ADP91, I'd be pretty sad if I had found out my car was full of rust and couldn't be complied here after dropping all that money. The fact that so many different people say that iron chef are super picky on your behalf sounds really reassuring, so they will be my pick. Your GT-R sounds amazing btw!

Knowing that previous GT-R sales have been going when the dollar was high also gives me and indication of how less I'll get compared to others now that the dollar is low atm, so I'd be paying almost the same as ones here but might get the paperwork and quality through importing.

There is no doubt in my mind that importing is the better option if you're after quality and variety. My advice is to spend the money and get the best possible car, the higher your budget the less time it takes to find 'the one' because your options will be more open. In terms of paperwork and history, some will have it and some won't. Again, the more expensive (and clean) the car is, the higher the chance it has been properly looked after with books. I'd say most 4.5 rated cars would come with a good amount of paperwork (that's probably part of the reason they get a 4.5 rating), I even got 2 spare keys which I thought was cool.

And yeah, J-Spec or Iron Chef would be perfect. I say J-Spec because I used them and the car speaks for itself.

Edited by ADP91

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
    • I also got the same floor mats for a bit of extra bazzaz haha
    • Some more close up pics now that I’m back to working on the car, the loop pile is nice but again haven’t compared it to the other types in person, it’s hard to tell from the pics on the website. View of the hemming on the edges too, it comes in 2 pieces - front and back, honestly very happy with it for anyone on the fence.  Also attached my previous pics from further up as it didn’t let me post them directly before. (Nothing worse than photo bucket pics that aren’t hosted anymore years later)
×
×
  • Create New...