Jump to content
SAU Community

Recommended Posts

Hi guys, I’m looking for some advice.

I have a 1994 R32 GT-R V-Spec II and would like to upgrade my dumps and turbos (and hopefully gain a bit more power) but seek your advice on best brand/model combinations..........

I wanted a car that was visually as close to stock as possible (even sourced and fitted a new period correct Eurovox AM/FM radio) but returns the most amount of power without compromising driveability.

The current specs of my car are as follows:

• 3.25” HKS Performance Exhaust
• 3” High Flow Catalytic Converter
• Niztune
• Nismo MAFS
• Splitfire Coils
• HKS EVC 6 Boost Controller - Set at max (22 psi) and hidden behind the ashtray.
• Sard 720cc Injectors
• Walbro Fuel Pump (size not known)
• Excedy Heavy Duty Clutch Inc diaphragm, friction plate and throwout bearing. Flywheel machined to suite.

FWIW....... It also has Bilstein front and rear Strut/Shock set up with King Springs and Whiteline upgraded front and rear sway bars.

It was Dynoed at 285rwkw at Croydon Motorsports and 272rwkw at Unigroup Engineering, make of those figures as you will.

Same set up, similar conditions.

It has standard dump pipes and factory original ceramic turbos.

It’s obvious that the STD Turbos are running pretty much to capacity so I’m looking at upgrading both the dumps and Turbos.
I was thinking of TOMEI dumps, open to model/part number recommendations and a pair of Garrett GT2860R-7 Turbos. (R34 GT-R N1 Style).
The car feels like a factory STD car with a healthy amount of performance.

The car will only used for occasional spirited weekend drives.

What dump/turbos combination would you recommend other than what I've already suggested and is there anything else I should look at to enhance the performance without losing drivability.

I’m not keen on changing the cam so would adjustable cam gears serve any merit for more bottom end performance?

Should I change any of the parts already fitted?

I appreciate your input......

Cheers,

Bob.

post-78207-0-00448300-1444502133_thumb.jpg

post-78207-0-54447600-1444502152_thumb.jpg

post-78207-0-15656800-1444502171_thumb.jpg

post-78207-0-09126200-1444502197_thumb.jpg

post-78207-0-50576800-1444502214_thumb.jpg

post-78207-0-07821700-1444502244_thumb.jpg

post-78207-0-54525100-1444502261_thumb.jpg

post-78207-0-17788800-1444502278_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/460293-help-in-upgrading-dumps-and-turbos/
Share on other sites

My thoughts based on my cars previous setup.

  • Open style dumps (Tomei, Mines, R34 etc)
  • Matching front pipes, preferably equal length
  • Adjustable cam gears (I saw very good low/mid end gains getting this right)

-7s if you're happy with the setup you have but just want to push the a little bit harder.

-9s if you want to keep similar response to stock, but would like to seem more power (~50hp) over the -7s

On -5s it's very worthwhile opening up the exhaust manifolds while turbos are off.
I'd be interested if people think it's worthwhile on -7s/-9s also, or whether it is seen to negatively impact these smaller turbos?

you like your motor?

turn the boost down on those turbos before they kamakazi themselves

Yep........ Thanks for the advice and hence why I made the original post.

I very rarely take it past 4000RPM so it hardly goes past half its maximum.

The front pipes are part of the HKS 3.25" system so I'm happy to stay with them.

How do these look as upgrades?

http://www.kudosmotorsports.com/catalog/tomei-cam-gear-set-intake-exhaust-tomei-152009-152010-nissan-skyline-r32-gtr-gts-gts25-gts4-gtst-r33-gtr-r34-gtr-p-854.html

http://www.kudosmotorsports.com/catalog/tomei-turbocharger-dump-pipe-set-68mm-275-tomei-expreme-421201-nissan-skyline-r32-gtr-r33-gtr-r34-gtr-stagea-wgnc34-260rs-rb26dett-p-601.html

http://www.kudosmotorsports.com/catalog/garrett-garrett-gt2860r7-r34-turbocharger-set-nissan-skyline-r32-gtr-r33-gtr-r34-gtr-rb26dett-p-307.html

Cheers,

Bob.

Hpi dumps are way better.

But you would know that because all of this is extensively covered and a gazillion threads.

Yes of course........ Silly me!

http://www.kudosmotorsports.com/catalog/hpi-turbocharger-dump-pipe-kit-hpi-hp2tobnr32-nissan-skyline-r32-gtr-r33-gtr-r34-gtr-vspec-vspec-rb26dett-p-1211.html

For what you want, -7s or 9s and open dumps with cam gears and a tune will be perfect,

Cam gears are worth every cent (even with the factory cams)

My new exhaust is being fitted and the tune touched up soon which will basically make it what your car will be and you're welcome to take it for a drive to make sure it's what you want

Thanks Brett, I appreciate your reply and offer.

I know the Unigroup Dyno is the most modest of the higher profile tuners so if I can get to the magical 300rwkw on their dyno I'd be thrilled.

That requires a 10% increase primarily from the dumps.....

Not sure if that is realistic but my primary objective is to have a safe tune and no blow the whole thing up.

Cheers and thanks again......

Bob.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - there is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
    • no one recommending speedtek gearsets?   i'm in the same boat as Cosline but rwd, I am holding boost back in third to 600nm at the hubs to save the gear as i make nearly 750nm at the hubs on a mainline
×
×
  • Create New...