Jump to content
SAU Community

Recommended Posts

^you will be more likely to rub the tyres due to increased diameter and speedo will also be out. I run 265/35/18 and they are just about right. If I was to go 275 or bigger I would be going with a 30 profile. Use a tyre size calculator on the webz and try to match the factory rolling diameter as close as possible with your new size.

Link to comment
https://www.sau.com.au/forums/topic/460372-will-this-rub/#findComment-7620001
Share on other sites

According to ADRs and other stupid rules your apparently not allowed to fit a rim greater than 1" width and 1" diameter over stock. Sigh. I guess that's why most of us keep a set of some sort of stock rims just in case. but hey who could be farked getting defected.

Link to comment
https://www.sau.com.au/forums/topic/460372-will-this-rub/#findComment-7620005
Share on other sites

What's the issue with increasing rolling diameter. I though what's important was to keep all 4 tyres the same size for the awd

yep, you need to keep all 4 wheels the same rolling diameter, you also want to keep this rolling diameter the same as factory.

your answer has been given, if your at stock height then it will fit but will not be ideal, your gonna have an incorrect speedo

Link to comment
https://www.sau.com.au/forums/topic/460372-will-this-rub/#findComment-7620014
Share on other sites

yep, you need to keep all 4 wheels the same rolling diameter, you also want to keep this rolling diameter the same as factory.

your answer has been given, if your at stock height then it will fit but will not be ideal, your gonna have an incorrect speedo

Apart from incorrect speedo the 40 profile will it rub under normal driving conditions?

Link to comment
https://www.sau.com.au/forums/topic/460372-will-this-rub/#findComment-7620032
Share on other sites

According to ADRs and other stupid rules your apparently not allowed to fit a rim greater than 1" width and 1" diameter over stock. Sigh. I guess that's why most of us keep a set of some sort of stock rims just in case. but hey who could be farked getting defected.

I believe we have 2" increase as the 33 ways more than 1400kg

FWIW guys, at least in SA, they do not actually still go by those old rules regarding a fixed number of inches increase in wheel width or wheel diameter. So long as the % change in rolling diameter is inside the limits you can do any diameter change you like. So that comes down to availability of suitable profile tyres. Same with the width. So long as track is not out of spec and wheels/tyres do not poke or have interference problems, you can have as many inches extra as you like.

Of course, practically this often works out to being not much difference to the old blanket rules anyway.

So while I know this to be the case in SA, it may or may not be in other states. But it was my understanding that most of the other states are being equally realistic about it these days. The old rules were written in simpler times.

Link to comment
https://www.sau.com.au/forums/topic/460372-will-this-rub/#findComment-7620160
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
    • I said Garrett style. Not Garrett genuine. And something in the G30 550 range is what you want. Not those pokey little old fashioned T28 sized things. The intake ports in the head are small. There is little benefit in fattening up the runners and leaving ths actual ports small. Just run what you've got. And on the subject of Nistune vs Haltech etc..... You know you can control the transmission with decent standalone ECUs these days, right? No need to keep any of that old Nissan bullshit. Don't get me wrong - I use Nistune on my Neo. But it is a DET, so the number of bodges and workarounds I had to do to make it work in a chassis without ABS, TCS, etc, is quite small compared to the herniated arsehole you will have trying to make it work on a motor that doesn't have some of the things that the turbo ECU wants to see. Just easier to bite the bullet and go aftermarket outright.      
    • Hmm. Only when the f**king thing is actually working. Still can't find the leak. And that's with dye being put in the last 3 times!
×
×
  • Create New...