Jump to content
SAU Community

Recommended Posts

^you will be more likely to rub the tyres due to increased diameter and speedo will also be out. I run 265/35/18 and they are just about right. If I was to go 275 or bigger I would be going with a 30 profile. Use a tyre size calculator on the webz and try to match the factory rolling diameter as close as possible with your new size.

Link to comment
https://www.sau.com.au/forums/topic/460372-will-this-rub/#findComment-7620001
Share on other sites

According to ADRs and other stupid rules your apparently not allowed to fit a rim greater than 1" width and 1" diameter over stock. Sigh. I guess that's why most of us keep a set of some sort of stock rims just in case. but hey who could be farked getting defected.

Link to comment
https://www.sau.com.au/forums/topic/460372-will-this-rub/#findComment-7620005
Share on other sites

What's the issue with increasing rolling diameter. I though what's important was to keep all 4 tyres the same size for the awd

yep, you need to keep all 4 wheels the same rolling diameter, you also want to keep this rolling diameter the same as factory.

your answer has been given, if your at stock height then it will fit but will not be ideal, your gonna have an incorrect speedo

Link to comment
https://www.sau.com.au/forums/topic/460372-will-this-rub/#findComment-7620014
Share on other sites

yep, you need to keep all 4 wheels the same rolling diameter, you also want to keep this rolling diameter the same as factory.

your answer has been given, if your at stock height then it will fit but will not be ideal, your gonna have an incorrect speedo

Apart from incorrect speedo the 40 profile will it rub under normal driving conditions?

Link to comment
https://www.sau.com.au/forums/topic/460372-will-this-rub/#findComment-7620032
Share on other sites

According to ADRs and other stupid rules your apparently not allowed to fit a rim greater than 1" width and 1" diameter over stock. Sigh. I guess that's why most of us keep a set of some sort of stock rims just in case. but hey who could be farked getting defected.

I believe we have 2" increase as the 33 ways more than 1400kg

FWIW guys, at least in SA, they do not actually still go by those old rules regarding a fixed number of inches increase in wheel width or wheel diameter. So long as the % change in rolling diameter is inside the limits you can do any diameter change you like. So that comes down to availability of suitable profile tyres. Same with the width. So long as track is not out of spec and wheels/tyres do not poke or have interference problems, you can have as many inches extra as you like.

Of course, practically this often works out to being not much difference to the old blanket rules anyway.

So while I know this to be the case in SA, it may or may not be in other states. But it was my understanding that most of the other states are being equally realistic about it these days. The old rules were written in simpler times.

Link to comment
https://www.sau.com.au/forums/topic/460372-will-this-rub/#findComment-7620160
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I like their veal scallopini.
    • Definitely a hearty eater when we go out, I consider these meals my cheat day as I've been watching my calories in and calories out pretty hard since my little fun size stroke, I've gone from a fat boy of 89 Kg, I'm only 165cm tall/short, down to a almost semi lean 73 Kg over the last few years, I'm currently around 17% body fat which my doctor is very happy with, but, my goal is to slowly get down to and maintain 15%,so yeah, I want all of the protein, carbs, fats and sugars when I go out for a binge
    • There was a great one on Victoria Rd in Gladesville too back in the day. I can only assume GTSBoy is thinking of the mill up on the wollondilly, no restaurant there any more but they have restored the original steam engine on site and run it every few months, have an annual steampunk festival etc @The Bogan, you came to the wrong town for restaurants. we have a few reasonable asian and indian options but the Paragon is as good as it gets otherwise. That brewery is apparently just opened, been meaning to give it a go some time. The Highlands have plenty of fancy options but I suspect you are more a hearty eater than fancy eater
    • Thanks for coming back to post the update, maybe it will help out the next person!
    • Going by the intake & injectors I'd be guessing it's a DE, check the head casting number, should be 5L8 on a DET, 5L7 I think is the DE number.
×
×
  • Create New...