Another Coilpack Issue?

[IM-32-FK]

i'll also just say, I like your attitude, seriously. You were prepared to have a go at it...ok, f*ked it up, but, acknowledged your mistake and have learnt something in the process. As long as no major damage caused, not a bad result at all. Although, I you're seriously concerned bits of ceramic fell in the cylinder and you haven't run the car yet, pull out the plug and use a vacuum hard up against the hole, vacuum out any bits of insulator in there.

thanks, i already vacummed it after i pulled it out, there was some on the sides

Edited October 28, 2015 by IM-32-FK

[Ben C34]

[IM-32-FK]

i'll also just say, I like your attitude, seriously. You were prepared to have a go at it...ok, f*ked it up, but, acknowledged your mistake and have learnt something in the process. As long as no major damage caused, not a bad result at all. Although, I you're seriously concerned bits of ceramic fell in the cylinder and you haven't run the car yet, pull out the plug and use a vacuum hard up against the hole, vacuum out any bits of insulator in there.

im almost sure i got most of it out, maybe a couple of little pieces might of fell in. Would it just burn out when the oil warms up? Wont cause the engine to seize up or anything or reduce performance?

[hardsteppa]

it's ceramic, it won't burn. Nothing good will come of having it in the cylinder. But, any household vacuum cleaner should be strong enough to pull bits out if you put it hard up against the open spark plug hole.

[Hadouken]

Definitely will reduce performance. Heaps of oil there where you dropped it.

Seizing is very possible.

[IM-32-FK]

i vacummed it after i took it off and ran it through the hole too. Hopefully it wont do much damage. RB25de neo is not worth much anyway, if anything happens ill just put a rb25det, ive been meaning to do it for a while just saving up some cash. If it does f**k up, can i still sell the bottom end? like which part of the motor will f**k up, the head?

[iruvyouskyrine]

Pics of rb20 coilpack arrangement.

[IM-32-FK]

Pics of rb20 coilpack arrangement.

Notice how i had to cut the edge of the coilpack 2 and 3 with a angle grinder so they can sit in flat? One bolt on each hole mate...had to cut 4/6 of the coilpacks

Edited October 28, 2015 by IM-32-FK

[iruvyouskyrine]

Okay and where does the loom an igniter plug in?

[IM-32-FK]

Okay and where does the loom an igniter plug in?

to the stock rb20 clips. So the igniter has 2 large clips plugging into it, one from the loom the other is a clip from the firewall, the loom also has a grounding cable and another cable clip with 3 wires running into it which clips in to another clip on the firewall

Edited October 28, 2015 by IM-32-FK

[Hadouken]

Just put turbo on.

De and det are exactly the same.

Nissan made it easy for conversion

[IM-32-FK]

Just put turbo on.

De and det are exactly the same.

Nissan made it easy for conversion

you're not even trying anymore lol

[iruvyouskyrine]

Okay so somehow you have ended up running a R32/33 loom on a neo. Can you be so kind as to take a picture of the ECU? Taking off the plug for a picture of the pinout would be even better.

[Wordsmith]

Where'd you get $50 coilpacks from?

[tridentt150v]

Does this mean your sparkplug sale is off?? was really interested in buying dropped and over tightened spark plugs!!!!

More seriously, use a vacuum cleaner, some tape, and a 300mm of that clear 10mm plastic hose. Tape hose to vacuum cleaner hose and push through the spark plug hole and work it around while vacuuming. Not a guarantee, but its better than 'fingers crossed'.

[GTRPSI]

And when your done vacuuming out what you can, your last step would be to crank her over with all the plugs out to blow out what you missed (if anything was missed)

[IM-32-FK]

My oil pressure guage going crazy. Its sometimes going to 1 when on idle then 6-7 when cruising then back to 1. Didnt notice a drop in performance tho. Oh well time for a turbo rb25det

[Hadouken]

You're just trolling now.

[IM-32-FK]

You're just trolling now.

Im not. You think ill need much electric work if i put a s2 rb25det into a r32 with a neo? Its gonna cost me like 2.5k total probably

[tridentt150v]

No you'll be fine with the odd jolt!!! Can be used as a reality check.

But yr car will need a shxtload!!!