Jump to content
SAU Community

Recommended Posts

Just a quick question about oil coolers for GTR. I know I need one, but I refuse to pay the ridiculous money that is asked for the jap-branded ones. So basically my question is - does anyone have opinions on perma-cool oil coolers? I know they are a variation on the tube&fin design, but they claim to have proprietary design that overcomes the limitations of this type of cooler. The largest size they have suits up to 450hp, which is slightly more (I think) than my car makes at the moment, so I figure it should be OK. My other option would be to import a MOCAL bar&plate cooler that the UK guys swear by, but this unit would have to be much smaller due to size/weight/cost limitations.

I realise you get what you pay for, and I shouldn't skimp on parts for a car like a GTR, but there is also a difference between spending sensibly and getting ripped off.

So: Perma-cool - good, bad, avoid like the plague? MOCAL? worth the effort of importing from UK?

Link to comment
https://www.sau.com.au/forums/topic/46087-oil-coolers/
Share on other sites

I got this TRUST kit for $843. I got a few other things aswell so I am unsure what the delivery was exactly. Its the 16- row kit mounted in the fender, and filter relocation kit. It very comprehensive and I am getting it fitted this Wednesday when I take my car in for its first real service since getting it from compliance. Not sure how much cheaper you could get a complete car specific kit for.

1841Resize_of_2004-07-13_006-med.JPG

Link to comment
https://www.sau.com.au/forums/topic/46087-oil-coolers/#findComment-936895
Share on other sites

jlnewton, nice exactly what i'm after - where did you get that from?

I got it through Greenline, I usually go through Nengun but he never got back to me, and hasn't the last couple of times. So now Greenline has my business. He did note on the quote that it was a discounted price and it was slightly cheaper than the price for the 10row infront of radiator type on their page so I might have just been lucky. :wassup:

One catch with this kit though, it can't be used with standard BOVs as it sits in the right hand fender and there is not enough room with the stock BOV setup there. Mine came with twin dual chamber Apexi BOVs which would have been fine but I wanted to plumb it back so I got the TRUST type R to do this.

Lucky I went to all the trouble of finding a set of stock BOVs to fit. :rofl: Oh well.

Link to comment
https://www.sau.com.au/forums/topic/46087-oil-coolers/#findComment-937100
Share on other sites

ferni: I just got a HKS oil cooler kit (16 row) from greenline, had ordered a Trust one till I found out the 'hard way' that you need to change to Trust Type R blow off valve to fit it, so sent it back and they sent me the HKS one....

From memory it was about $1100 delivered.....

Note: does not include oil filter relocation.....

Link to comment
https://www.sau.com.au/forums/topic/46087-oil-coolers/#findComment-938326
Share on other sites

ferni: I just got a HKS oil cooler kit (16 row) from greenline, had ordered a Trust one till I found out the 'hard way' that you need to change to Trust Type R blow off valve to fit it, so sent it back and they sent me the HKS one....

From memory it was about $1100 delivered.....

Note: does not include oil filter relocation.....

I have the same kit for sale, brand new, bought through greenline.

Didnt get to use it.

Offers above $800, bought for $1100

Link to comment
https://www.sau.com.au/forums/topic/46087-oil-coolers/#findComment-938463
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...