Jump to content
SAU Community

Recommended Posts

On 9/14/2016 at 1:16 PM, dan.1337 said:

After the test fit from the phone, I had to bend and modify the UAS one anyway and it still doesn't clear my wheels properly at full lock.

Thanks again for the photo and link mate! Here's how the DIY ones turned out, no issues at full lock as yet: http://www.sau.com.au/forums/topic/448613-r34-gtt-brake-improvement-without-breaking-the-bank/?do=findComment&comment=7777134

 

On 21/11/2015 at 11:24 PM, dan.1337 said:

Thanks!

I have Cusco camber arms and an ebay HICAS lock bar.

Fronts are running -3 camber, rears around -1. Toe slightly out and slightly in on the rear. Standard caster adjustments.

I don't actually remember the exact settings as it was done manually by my tyre guy who doesn't use a printer.

Hey man, is -3 degree the max you can get out of the Cusco arms? I have my own 33 GTS track car/build and I'm starting to destroy shoulders now I've sorted the chassis rigidity and ride height all out. It'll only get worse when I put semis on. -3 Is probably a good start currently all front arms are stock.

22 hours ago, Tangles01 said:

Hey man, is -3 degree the max you can get out of the Cusco arms? I have my own 33 GTS track car/build and I'm starting to destroy shoulders now I've sorted the chassis rigidity and ride height all out. It'll only get worse when I put semis on. -3 Is probably a good start currently all front arms are stock.

Yeah, that's the max I could get.  My tyre wear seems to be pretty even across the surface, but then again, tyre wear is mostly determined by the amount of toe you run.

  • 2 weeks later...
On 26/09/2016 at 11:48 AM, dan.1337 said:

Yeah, that's the max I could get.  My tyre wear seems to be pretty even across the surface, but then again, tyre wear is mostly determined by the amount of toe you run.

Yeah it's not wear i'm worried about, purely grip levels cheers.

  • 6 months later...

It's been a long time without you my friend... 

Quick update here since a few things have changed in my last update from 2016. 

Speed trap analysis for my 1:35 lap taken from RaceChrono:
295e6o0.png 

30m7cb9.jpg

r8hxqs.jpg

5mmvi8.jpg

At the end of 2016 I took a role overseas and moved to HK in January 2017 for at least the next two years. I was able to have one last drive through some of the best roads in Victoria with a mate before deregistering my car and storing it till I return.

11ukwub.jpg 

2h3bhol.jpg

I actually miss driving it quite a lot, especially after seeing all the recent track activity. I will be back and I hope the z221s mature nicely over time like fine wine...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...