Jump to content
SAU Community

Recommended Posts

hi everyone

i am thinking of sellin my r33 non turbo and upgrading to the turbo the only problem that i have had with mine is the clutch. with the r33 gtst do they have more problems than a non turbo. the one om thinking of getting has a rebuit engine with only 700kms and new clutch and gearbox. do you think i should go ahead and buy it or should i keep my non turbo.

i also wanted to know what are the main things that i should look out for on the gtst when i inspect it

your feedback will be appreciated

Link to comment
https://www.sau.com.au/forums/topic/46157-buy-a-r33-turbo-or-keep-my-non-turbo/
Share on other sites

but will i get many problems with it being a turbo or does that start when i strat boostin it cause all the engine is stock apart from an airfilter and a supersonic BOV

for everyday driving id say around 11psi would be sweet... you shouldnt get much problems.. hopefully none if its been fresh.

The only problem is that the engine gets wasted quicker with a turbo, but it is much more nicer to drive (w0o0o0o0 b00st). My cars engine is close to a rebuild (running 17Psi) as soon as it gets completely rooted i am shovin in an RB26DETT. Go for the GTS-T.

The only problem is that the engine gets wasted quicker with a turbo, but it is much more nicer to drive (w0o0o0o0 b00st). My cars engine is close to a rebuild (running 17Psi) as soon as it gets completely rooted i am shovin in an RB26DETT. Go for the GTS-T.

Not necessarily.. mine ran 11-12psi for the near 2 years i had it, and the year before it the previous owner ran similar boost. If the engine is in good condition and tuned well with appropriate modifications there should be no problems. Adding an aftermarket turbo running 17psi.. well that is different :) If you keep the stock turbo, you should be able to run 180rwkw or so no problems for years and years if you ask me.

Go for the r33 gts-t.. at the moment seems to be a great time to buy.. some nice ones around 16-17k all around australia it seems.. r32 are too expensive at the moment, and the rb25det is the superior motor.

thanks every1. the gtst im looking at has no modifications to the engine except for a hks pod filter and a turbosmart BOV. it hasnt been boosted. the engine and gearbox has been rebuilt and it has a heavy duty clutch. usually when the engine is rebuilt is anything done to the turbo. if i drive normally changing at 3 rpm but occasionally give it a bit more do u think that the turbo would be alrite or do i have a chance of blowing it

thanks every1.  the gtst im looking at has no modifications to the engine except for a hks pod filter and a turbosmart BOV. it hasnt been boosted. the engine and gearbox has been rebuilt and it has a heavy duty clutch.  usually when the engine is rebuilt is anything done to the turbo.  if i drive normally changing at 3 rpm but occasionally give it a bit more do u think that the turbo would be alrite or do i have a chance of blowing it

Your turbo wont blow unless you start boosting it, the r33 turbo are known as one great turbo when running around 11-12psi.

just dont worry about blowing your turbo if your gunna run more then .85bar.

you say it hasnt been boosted but yet its had an engine rebuild. find out the cause of the engine rebuild. you can shift at red line in every gear and you wont blow the turbo.

if you run 19psi through thr stock turbo then yes you will , stock boost is fine.

i would find out why the engine was rebuilt and what exactly was done, could just be a simple turbo hiflow and the selling is saying its had a rebuilt engine. also the stock gtst clutch is fine for stock engine, seems a bit odd that it has a heavy duty clutch already.

maybe its just me that thinks its odd. anyway ask why it was rebuilt

you say it hasnt been boosted but yet its had an engine rebuild. find out the cause of the engine rebuild. you can shift at red line in every gear and you wont blow the turbo.

if you run 19psi through thr stock turbo then yes you will , stock boost is fine.

i would find out why the engine was rebuilt and what exactly was done, could just be a simple turbo hiflow and the selling is saying its had a rebuilt engine. also the stock gtst clutch is fine for stock engine, seems a bit odd that it has a heavy duty clutch already.

maybe its just me that thinks its odd. anyway ask why it was rebuilt

the engine rebuild was because he said that he didnt want it to die on him. it has had machined heads, new head gaskets and stuff like that. the engine was boosted but when he got the rebuild he brought it back to normal with the stock intercooler, he said the old way attracted attention. that is why the clutch was changed to a heavy duty.

for everyday driving id say around 11psi would be sweet... you shouldnt get much problems.. hopefully none if its been fresh.

WRONG! It would be sweet untill u need to buy a new turbo and possible do a rebuild

Max Boost Stock r33 trubo can run is 12PSI; I would only run around 0.5, 0.6bar (which is around 6/8psi).

With that lvl of boost, you will not get many problems; I was running 0.6bar and wasnt having any problems but now i run stock boost 0.4bar (using my ebc) and i find that it is still as fun as running a high boost lvl and without having to worry about blowing my turbo or anything in my car.

Also running 12PSI, i would say would need a FMIC or an upgrade stock cooler (maybe r34 gt-t cooler)

regardless of how straight the car looks, get a professional to check it out;

a work shop u trust;

its a must;

we got a heap of stuff fixed by the dealer before we picked up our car, and it repayed the cost of the inspection easily;

when i got my car, i spent a heap of time checking out various cars, before settling on a reasonably expenive stocko 4 door; didnt mind paying extra as the car was in super good nic;

since we have had teh car, almost no problems what so ever (i blew up a clutch, not the cars fault)

I ran 12psi on my stock turbo/stock cooler for 3 years, and around 80,000 of the 100,000km I've put on the car, including multiple skidpan days and a couple of trips to the drags. It even had the stock ECU until I put a Mines ECU in for the last 6 months of that. Now I'm running a T3/4, and on 10psi it's heaps quicker than the stocker was on 12psi. I certainly wouldn't say that running 12psi is a recipe for disaster as some people seem to be alluding here, and limiting boost to single figures to stop parts of your engine from exploding is completely unneccessary, but if it helps keep your mind at ease then go for it.

A turbo engine is really no more unreliable than a non-turbo engine. Just look after it and make sure it's tuned properly and you will enjoy many boost-happy years :)

Agree with Spooks on the point about getting it inspected by YOUR mechanic, not one the car yard/person you're buying from suggests. Other things to check are to make sure it idles smoothly, revs cleanly under load, and doesn't smoke excessively. Expect a little black smoke under heavy acceleration, particularly if boost is higher than stock or it has an aftermarket ECU, but anything else (white/blue or if it's pissing out) turn and run. Go up a hill in 4th at 80-ish and nail it. Listen for clutch slip. Pop the bonnet and look for oil leaks around the turbo, and look for excessive blow-by around the hose clamps on the intake. Also when you drive it, check the synchros, if it crunches heavily between gears then the gearbox will need a rebuild. Look at the tyres and check for signs of uneven wear, which can mean either bad wheel alignment, or suspension problems. Also do the usual check for rust, accident repairs, condition, dodginess etc.

This is all stuff that applies to all cars, turbo or NA, Skyline or not. That's all I can think of atm, but there are no doubt other things to check out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...