Jump to content
SAU Community

Recommended Posts

As above, I was installing a new aftermarket headunit in my PM35 stagea and the ISO harnesses didn't work. Got rid of the harnesses and did it myself, perfect.

Did this morning with ISO harness, worked perfect....
  • Like 1

I got the head deck and everything is fine, however, is there something that will convert the factory AUX plug to a normal 3.5mm head phone jack that is commonly used in head decks? The factory Nissan one is quite strange.

I got the head deck and everything is fine, however, is there something that will convert the factory AUX plug to a normal 3.5mm head phone jack that is commonly used in head decks? The factory Nissan one is quite strange.

Are you referring to the radio antenna plug with 2 prongs? If so then you can buy an adaptor from JBHIFI for around $15

Are you referring to the radio antenna plug with 2 prongs? If so then you can buy an adaptor from JBHIFI for around $15

Nope got that. It's what sends sound from the DVD player or the factory screen through the stereo. The factory stereo has a strange plug type outlined in red in this pic post-98833-14516896258196_thumb.jpg
  • 2 weeks later...

Are you talking about the unit in the upper glove compartment? That will not play dvd's, it's only made to read the navigation maps.

You can run an aux cable for the stock screen/stereo via the unit in the rear LH boot trim but I don't know why you'd want to if you are upgrading the stock head unit.

In the upper glove compartment some has installed what looks to be an after market DVD player, the video goes through the pop up screen and the sound goes through the aux input in the rear of the standard head deck. I've got an aftermarket head deck which has only the 3.5mm jack at the front for aux. So basically I want to be able yo convert the standard plug to the new plug. I've tested a DVD in there before I changed head decks and it worked fine

http://www.microcenter.com/product/307193/5_ft_Retractable_S-Video_to_35mm_Video_Cable

Cant get into photobucket to add pic. But there is an svideo plug to 3.5mm jack

That may be it, although it looks like mine has more pins.

Is it the socket for the optional MD or CD autochanger?

Not sure, it comes up on the display as Aux. all it does is send sound to the head deck for the DVD player in the upper console I've attached another couple photospost-98833-14527559279737_thumb.jpgpost-98833-14527559434257_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...