Jump to content
SAU Community

Recommended Posts

Hi all, for those that haven't read my intro, my name is kev and I'm from the UK, the following posts are basically cut and pasted from an ongoing thread on a UK based forum, I'm going to make a few tweaks and update some of the text, as this has been running for a while, some of you may have seen this already, so I apologise for posting old news if you have.
It pretty much follows the disassembly (haven't got round to putting it back together yet) of my 1989 gun metal grey r32 gtr that I've had for a few years now, knowing it had been involved in an argument with a hedge by one of it's previous owners, I actually bought it unseen from a friend of mine to take to pieces and use the running gear for another project, Once I had the car I got it on the ramp and realised it was only cosmetic damage and in quite good condition for it's age, and I didn't have the heart to take it apart.
At this point I hadn't driven it yet, and once I did I fell in love with it and decided to run it for a bit, quite a bit, well five years or so, and to be honest apart from routine maintenance I haven't spent a penny on it. Then one day I noticed a slight tapping from the engine on over run, so removed the engine to investigate, and yes you guessed it, it had spun a bearing on number one, luckily no damage to the crank.
Now this is where any sane person would have put new shells in and put it back together, but I was toying with the idea of a few mods and needed time to think, so I came home, had a bottle of bud or two (to help clear the mind). and with the engine already being out and all, it just didn't seem right to miss this opportunity to clean a few bits, plus it would give me something to do while I was making my mind up.
I've already done quite a bit of work to the car, and some of the photos may be out of synch at first, but this is to try and fill you in on what's been happening.
It was never my intention to do a build thread , but my wife says I have issues, a lot of them, and talking to like minded people may help, because let's face it, when it comes to our GTR's we all have issues.
This was never going to be a big budget build, it's just me giving the car the TLC it deserves.This is probably going to be a slow process that will happen when time and money allows, but I hope some of you will find it worth a read.
I'm was also trying to get my garage finished at the same time as working on the car, so that has a knock on effect on what got done and when.
I'll try and keep up to date on that at the same time if anyone's interested, and believe me that's been a saga in it's own right. The things we put ourselves through to get a garage, but, if life was easy and all that!!!
A couple of pictures while it was still in one piece,
34434d1395511184t-grey-32-strip-clean-ki
It was in need of some attention, and that was before it spun a shell. I did use it as a bit of a work horse, and always when it snowed, it would go anywhere and never get stuck, it definitely owes me nothing.
34362d1395506582t-grey-32-strip-clean-ki
34370d1395506951t-grey-32-strip-clean-ki
This was taken just after it's untimely demise. So here it sat for quite a while, waiting to have it's heart removed and repaired, the only problem being, it's sat in the garage I've been building for the past three years to put it in, and as you can see it still needed some work before it was water tight.
34378d1395507962t-grey-32-strip-clean-ki
It would have been finished a couple of years back, had my neighbours not decided to be a set of bast**ds and fight me all the way through the planning process, but that's a whole other story.
Anyway, with all the relevant planning permits in place, I finished the block work and started fitting the roof.
Beams going on,

34442d1395511509-grey-32-strip-clean-kin

34450d1395511604-grey-32-strip-clean-kin

Then the sheeting, didn't get pictures of fitting the rafters,

34458d1395512570-grey-32-strip-clean-kin

And finally a clean dry place to work

34466d1395512796-grey-32-strip-clean-kin

Going to leave it there for my first post.

Regards Kev.

Link to comment
https://www.sau.com.au/forums/topic/462359-r32-gtr-renovation-from-the-uk/
Share on other sites

Thanks for the replies guys,

Could someone give me some advice on how to post images, the way I usually do it doesn't seem to work on here.

All my pictures are saved on Google photos, I usually open an image, right click, copy image address, click image icon in the "reply to this topic" window, then paste image address, job done, if that make sense. When I do that on here it says I can't use that image extension, whatever that means.

I know I may sound like an idiot, but I'm shit with computers, far more at home in my garage any day of the week.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
×
×
  • Create New...