Jump to content
SAU Community

Attn: R33 Gtr Owners - Full Length Cooling Panels Group Buy


Recommended Posts

Hi guys

I have sourced a full length cooling panel panel for the R33 GTR but need a donor car in Sydney to test fit before being sent out to be made in full carbon fibre. If you are in Sydney and wish to be the donor car to test fit 2 sets of panels (first will be the sample and second will be the first batch of cooling panels in carbon) please PM me, you will receive a small discount for your time and donor car.

start date: 20/1/16

end date: 20/3/16

i will give it 2 months approximately from start to finish. provided i can get the order and sample panel sent off early Feb.

Production and shipping time to me is approx 4-5 weeks. I will be using the same factory in China that i order my parts from for the group buy. I would love to support local workshops but have been quoted $650+ to get it made. (happy to receive recommendations from local sydney workshops that can do this at better price)

it will be vacuum infused and finished in glossy clear coat

approximate price in carbon fibre $400

approximate price in fibreglass $240

prices will be confirmed at end of production BUT it won't be far off the above quoted price, give or take up to $50~

this is at current exchange range (which sucks balls at 0.69 USD / $1 AUD) but still cheaper than nengun and RHD.

Shipping AUS WIDE will be $15 to metro cities and $20 to rural areas with tracking and insurance!
pick up available in Sydney.

During previous group buys, there was alot of interest requesting for the full length panel so if you're still interested, Post here.

If no interest within first 4 weeks, i will close this group buy.

Thanks

post-20416-0-35321300-1453245398_thumb.jpg

post-20416-0-77137900-1453245403_thumb.jpg

i forgot to note that the original cooling panel is from garage defend even tho they claim perfect fitment, i still want to try on a donor car to ensure that no time & monye is wasted on moulding a crap fitting panel.

  • 2 weeks later...
  • 2 weeks later...
  • 6 months later...

Bumping this back up.

I've managed to get a better price from another carbon manufacturer in China.

Up to 5 people
$280

5+ people
$260 

they already have the mould and it will take approx 6-8wks~ to make and be delivered
I will have trial fitment photos up soon as one is ready and will be fitted to Terry's R33 GTR.

shipping will range from $15-$30 depending on your area by registered post or courier.

Closing this group buy on 23/9/16

Hi guys,

R32 GTR full length panel is available for same pricing and can be included in this group buy.

Up to 5 people
$280

5+ people
$260 

R33 GTR
- Omurru
- Terry
- dori34

R32 GTR
-
-
 

Also FYI, i require minimum of 10 people in total for group buy to go ahead.

Thanks

Will do!

I have found out that the factory is closed for a week in October due to national Holidays so i will let this group buy run a bit longer until 10/10/16.

Also happy to include other small parts for Skyline's, Silvia's, Evo's, 86, WRX, Rx7 etc... like I have done in previous group buys.
 

R33 GTR
- Omurru
- Terry
- dori34
- MUFASA

R32 GTR
- NISR32.5
-

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...