Jump to content
SAU Community

2016 Round 2 - Sunday 28th Feb Calder Park Track Day - Hosted By Wrx Club


Recommended Posts

12687829_1265233546836352_65941137551669

** URGENT UPDATE **

To meet national safety requirements of the AASA at the Calder circuit, an additional man made chicane will be placed on the back straight between Turn 5 & Turn 6 to limit competitors speed prior to entry of T6. The chicane will be constructed from water filled barriers.

Should the track be declared a wet day then an alternative configuration will be used encompassing the use of pit lane (with speed restrictions) as part of the track, avoiding the main straight where drag racing is held.

Well after a 12 month break we are back at Calder park raceway

- For anyone interested in attending their first track day here all you need to know : http://www.sau.com.a...y-requirements/

This round we will be attending the day run by the Impreza WRX Club of Victoria who have kindly offered us affiliate club pricing for the round.

- This discount entry price of $215.00 is only valid until the 20th of February.

- Late entries are $230.00

- Entries Close 25th of February

- Entries can be found here: http://www.wrx.com.au/event-2119478 Choose affiliate club entry

- Affiliate code : 9BERLVDM (make sure you put SAU VIC as your club and your valid member number)

You all have time to get your cars ready, if not come up and spectate as it is free.

Squires Loft Nunawading will be putting on lunch for all SAU VIC members (Comment in this thread if you are attending so we can cater accordingly).

12670037_1265234503502923_24073939576270

  • Like 1

Awesome, just put in my membership application so I can join in :)

Good to see that Calder is a clockwise track, I've only ever done Sandown before, need to rotate tyres accordingly.

Hey do I need a CAMS license too or is this run as a Come and Try day?

Just looking at the Supp Regs (http://www.wrx.com.au/resources/Documents/Motorsport/2016/Round%202%20-%20Calder/2016%20Round%202%20Calder%20Supp%20Regs.pdf) it says -

DRIVER ELIGIBILITY

All drivers must hold a current AASA license or CAMS Level 2S license or higher.

So might be a good idea to look into one of those soon so they have time to send it out.

Good luck and hope to see you there :)

  • Like 1

With very limited numbers available this is not a come n try day.

However for this event you will only need a CAMS L2(J) license as a minimum.

Come n Try (Level 1) license are only available once a year per person who hasn't had any other CAMS license previously.

  • Like 1

Just looking at the Supp Regs (http://www.wrx.com.au/resources/Documents/Motorsport/2016/Round%202%20-%20Calder/2016%20Round%202%20Calder%20Supp%20Regs.pdf) it says -

DRIVER ELIGIBILITY

All drivers must hold a current AASA license or CAMS Level 2S license or higher.

So might be a good idea to look into one of those soon so they have time to send it out.

Good luck and hope to see you there :)

With very limited numbers available this is not a come n try day.

However for this event you will only need a CAMS L2(J) license as a minimum.

Come n Try (Level 1) license are only available once a year per person who hasn't had any other CAMS license previously.

Thank guys. I haven't had a license previously but just applied for L2S online and it's listed as 'active' on my CAMS member dashboard.

Now just waiting for my SAU membership number to come back so I can sign up ;)

  • Like 1

With very limited numbers available this is not a come n try day.

However for this event you will only need a CAMS L2(J) license as a minimum.

Come n Try (Level 1) license are only available once a year per person who hasn't had any other CAMS license previously.

Just to clarify, this was posted in the motorkhana thread. Not applicable for this event.

Ok guys slight change of plans to the track layout, here is the official statement from AASA to the WRX club.

** URGENT UPDATE **

To meet national safety requirements of the AASA at the Calder circuit, an additional man made chicane will be placed on the back straight between Turn 5 & Turn 6 to limit competitors speed prior to entry of T6. The chicane will be constructed from water filled barriers.

Should the track be declared a wet day then an alternative configuration will be used encompassing the use of pit lane (with speed restrictions) as part of the track, avoiding the main straight where drag racing is held.

We are working closely with they WRX club, AASA, Calder Park and WAP to find an alternate solution. I will keep eveyone updated if we have any other changes.

  • Like 2

Really? What a f*%king joke if so. I'm now glad that I didn't try and get the car ready for this event and that I hadn't paid money to run.

Well the front straight is much longer run off being bitumen, believe it or not but the back straight is nearly as fast.

I can assure you we have had multiple discussion with all parties and none have been approved thus far (even running in reverse), I have not given up yet and let's hope for the best.

I dont get it whats the difference between flying down the main straight which has gravel at the end and is a 1/3 longer than the back which also has gravel

They normally have the gate open at the end of the main straight so if you have a brake failure or other issue then you can go straight ahead through the gate and you end up in a large paddock.

This has probably come about due to the ass reaming that they got from the Qld coroner regarding the death of Sean Edward at QR (another AASA track) where the lack of depth to the run-off area (even though it is greater than Calder's for a shorter straight) was listed as a contributing factor to his depth.

We are seeking volunteers to assist with Flag Marshaling on the day.

Flag marshaling provides you with access to some exclusive areas for the best spectating possible, and the chance to get right up close to the action.

Volunteers who assist will be provided with a complimentary lunch by theImpreza WRX Club Victoria

We need a total of 12 volunteers, for half day shifts (i.e. first shift 9am -> Lunch & then Post Lunch -> Track close)

If you are interested please shoot an email at [email protected]

Thanks



  • Similar Content

  • Latest Posts

    • UPDATE: Yes the GSP Axles are compatible. I installed it on my R34 today and they are working a treat! Turns out that the S13, S14, S15, and 200 SX all used the same axles as the HR34, and ER34 NA models. Which is 2 bolt x 3 pairs.  
    • Also build this EH ute with 370z motor and gearbox with a couple of turbos just for fun.  
    • Got the passenger door on plus the master cylinder and booster. Loaded up to take it home. At home, the colour changes a lot in the light.
    • Nothing cheap, but I have seen the AC Hydraulic DK13HLQ which is pretty close to what you're asking for. The problem is the hydraulic cylinder mandates that the back of the jack be a certain height and Skylines have fairly deep inset floor jack points. A more certain and cheap option is to get some nominal 2x10 inch lumber boards and have one board be 1.5 feet, the other board 3 feet. Glue it all together with lots of clamps to maintain pressure. Make two of these. The ramp suggested above is a good idea, it takes quite a bit of clutch slip to get over each of the boards. I only need the first ~1.5 inches for my low profile jack on a standard ride height car but a lowered car you want to go up to the full ~3-3.5 inches. Paint it or store indoors if you want it to last.
    • Ok. And Nistune? I read (here too) mainly on Stagea threads that it can by "turn off" with Nistune. But they say they still had the sensor plug in. Next week iam going to the Nistune(and other ECUs) tuner so i can finally make it work. I drove the car home and apart from the cut it drove great. No misfire no smoke no hesitation or rough start...so hoping it is this sensor that is missing  
×
×
  • Create New...