Jump to content
SAU Community

Recommended Posts

Would you like the opportunity to drive real FORMULA FORD RACE CAR? Driving a single-seater Formula Ford racing car is unlike anything else. These are real race cars!!! You'll be strapped into the open cockpit by a six-point racing harness with the quick release steering wheel in front of you. You'll have the gear stick on your right connected to a 4-speed close ratio, purpose-built racing gearbox. You're seated only a couple of inches off the ground and you'll know it -- you can feel every bump and vibration as your super-responsive car reacts to every tiny adjustment you make.

We also have the world’s first purpose built Formula Ford 2-Seater with over 200hp and less then 1000kg in weight. Jump on board with our professional race driver for a edge of your seat experience.

Our drive days are available at Sydney Motorsport Park & Wakefield Park .

Check us out on – www.driving-experience.com.au or call us on 1300 121886

IMG_2836_zpsb89zgukr.jpg

_MG_4050_zpsokndp5ma.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/462722-anglo-formula-ford-experience/
Share on other sites

Hi mate. Our workshop is located in Glendenning near SMSP. If you would like to come visit and we can see if you will fit. Hard to say definately without seeing yourself. You will definately fit in the 2 seater no dramas. Just Pm or give us a call.

Prices start from $179 depending on whether you want to be a passenger or drive yourself. You can call me on 96779003 and I can give you the full details on all our experiences or check out www.driving-experience.com.au for all experiences.



  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...