Jump to content
SAU Community

Recommended Posts

Hey mate, these look awesome going to shoot you a pm as I woulld like a set of gaurs badges ;)

Hi All,

Updating post with recent inquiries in PM with the GTR R35 Badges draeted and now ready for cutting

Custom Machined CNC Billet - R35 GTR Guard badges to replace R33 or R34 GT Style - or what ever size you require can make these with any dimension required

R35 GTR Custom Billet Guard Boot Badge Emblem.png

Anyone interested send a PM and will advise details

Cheers

Edited by GMVLLE

Hey mate, these look awesome going to shoot you a pm as I woulld like a set of gaurs badges ;)

Hi Anthony,

Yeah the GT-R 35 style badge look pretty unique

PM the details and will advise asap

Cheers

Hi mate

Price on Nitto Engine Ornament on RB26

Thanks

Hi Bruce,

Due to many variations and aspects of the machining - depths, curves, edges, contours etc - we design to what you want in every detail.

After we have finalized the drawing we send our customers the final draft for approval before machining.

We have multiple finish options available

  • Mill Finished - straight off the machine
  • Semi Polished
  • Full Mirror Polish
  • Anodized
  • Multi Color anodized
  • Color Inlay's with pretty much any color
  • Crystal Clear filled above the color - which is designed to withstand high temps in engine bays and the harsh weather, UV's etc
  • Expressive Tool Path

Mixture of all of the above - whether you want full polish on certain area's, Anodized mixed with color inlay etc

All products are coated with our own special seal protecting it from oxidation - when anodized obviously we dont get this issue but fresh billet needs protection from the elements.

We also ensure to use high quality products and having our own special formula provides a mirror sheen for up to 2 years before needing to either polish or apply another protective coating.

Many products out there will affect the mirror polish and they lose part of their shine when they apply the coating, or discolor yellowish, where as our blend does not affect it at all when we apply it.

I will shoot through a PM and we can look to provide some design's with you to be able to advise an accurate costing.

Thanks

Hi mate, just wondering if mine have been completed just yet? Fingers crossed as looking forward to seeing them.. Cheers mate and talk soon. Cheers

wheel center caps for rays te37 18inch wheels?

We have a customer visiting tomorrow with the Gram Lights to take some measurements

Below are some design aspects - the most important part is the correct Outside dimension as most wheels have different centre hole dimensions - if we have this we can design them for you

any design that you want incorporated

Anodized any color - with various color inlay - mill finished, polished etc

post-141798-0-46378700-1460263751_thumb.png

post-141798-0-70146500-1460263809_thumb.jpg

Cheers

Hi mate, just wondering if mine have been completed just yet? Fingers crossed as looking forward to seeing them.. Cheers mate and talk soon. Cheers

Hi Mick,

sent a PM again regarding your badges, they have been completed for a week now :)

attached image of the badge after cure and post cure of the inlay

This image was taken after a semi polish and inlay - awaiting the final mirror cut and sealing. You will see in the image some polish still on the base surface area

GTT - Black Carbon Set

post-141798-0-47526300-1460264789_thumb.jpg

Cheers

  • Like 1

Hi All,

with some recent work over the last week or so - I just wanted to update this thread

See below RB26 Engine Ornament Plate

Mirror Polished Upper Surface and - Logo Font accents

Some pretty awesome color inlays - with a Crystal Clear Over

post-141798-0-86278500-1460460614_thumb.jpg

Also if anyone is interested in Custom CNC Machined Top Feed - RB25 and 26 Billet fuel rails - let me know we can provide the following options, also supplied with the accessories AN8 fittings, Spacers, O'rings etc - spacers and fittings also anodized to which ever color you want

Anodized any color

Machine Finish

Custom logo or font work incorporated

Polished accents

Color inlay

or a mixture of all of the above

post-141798-0-78899000-1460460905_thumb.jpg

post-141798-0-49781100-1460460906_thumb.jpg

post-141798-0-88418500-1460460906_thumb.jpg

Cheers

www.kustom20.com.au

  • Like 1

Received my gtt badging and must say.. they look good. Nice work.. i will be recommending your work to all. Thanks heaps.

Thanks Mick,

Very much appreciated - I ran off some sample GT-T Badges for you to lay in some blue and red as requested. I will send the images when these are complete with our other production orders.

Take care champ

Received my gtt badging and must say.. they look good. Nice work.. i will be recommending your work to all. Thanks heaps.

Hi Mick,

Just advising - We have the Red and Blue GT-T samples completed, also inlayed one green and will post images shortly.

Received my gtt badging and must say.. they look good. Nice work.. i will be recommending your work to all. Thanks heaps.

As requested by some members,

See below - Custom CNC Machined Billet GT-T Emblem

Color Inlay Red Green and Blue - Cross Carbon effect in Blue and Green - the Red only received the full flat finish with the mirror polish under inlay

If I had to do green again - I would probably lay another coat to darken the edges makes the centre pop a lot more - or maybe a very light coat of Black in the cross lines under the green which would highlight the highs and lows much better. The green still looks amazing just a personal preference

post-141798-0-21034000-1460984486_thumb.jpg

Thanks All - PM if you are interested and any color choice

Edited by tuning_vs_hardware

Hi again, i will get another lot done for me. Im liking the red carbon look the 2nd one down. And gee alot of people have asked me about my badges on facebook and other sites so i think a few are gunna be wanting. Anyway talk soon. Thanking you. Mick

Hi again, i will get another lot done for me. Im liking the red carbon look the 2nd one down. And gee alot of people have asked me about my badges on facebook and other sites so i think a few are gunna be wanting. Anyway talk soon. Thanking you. Mick

Thanks Mick,

Yeah they look pretty good - with the Carbon Effect

I had a play the other day with some other designs - but I guess its personal preference on design I put the words NISSAN going across the top of the letter T underneath the Inlay where the carbon effect is, and then going downwards in the letter T I used the S in the word NISSAN and put the word SKYLINE - in the drawing it looked pretty cool

I think with this wording slightly noticeable under the inlay would be a cool design.

If I can get a sample of this I will post it up

As for the other set in Red thats no probs we can run a couple of sets and have them sitting ready for what ever color needed.

Again thanks for your interest and support Mick - much appreciated

Hi All,

Just wanted to update thread with some images of the new designed Carbon Black Effect - GT-T Boot/Guard Badge

post-141798-0-18694600-1461575655_thumb.jpg

Anyone interested in the GT-T Badges let me know to get an order faster than normal as these will be getting cut in tomorrows production for current customers orders

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...