Jump to content
SAU Community

Recommended Posts

Hey so i have googled and searched through the forums quite a bit and would still like a second opinion. For a while my 34 was having coil pack issues, one cylinder not firing occasionally and sounding like a truck/loss of power. The other day i was driving as per normal and all of a sudden under throttle i was losing all power and felt like MASSIVE drag so i pulled over. At this point it was idling fine and would rev through the rev range perfectly but once in first gear id take off normally and after about 2 meters it would have a huge power loss and drag. I managed to get the car home 2 meters at a time as i didn't want to leave it on the street (really bad area) and then had to reverse up my drive way as it was the only way i could get it up there ( too much power loss in first but not in reverse). I let it sit for a bit and now when i start it it starts perfectly and then dies straight out. If i giver it some throttle it is fine but is spitting out black soot and will stall once it hits idle.

After hours of research i came up with the either AFM was not working, vacuum leak or faulty idle switch. So i pulled it apart the AFM and re soldered it and still no good. My question remains is the AFM faulty or is the idle switch faulty? any ideas? :D

Kinda losing my mind haha

Link to comment
https://www.sau.com.au/forums/topic/462964-r34-gtt-wont-idle/
Share on other sites

So were 5 wet?

Was it running than you removed them so they could have gotten wet. Plugs that work will not be wet because they burn the fuel. If it was running rough than you pulled plugs than they could have a chance to get fuel on them on the cylinders that are not firing.

I had one stuffed coil pack and it made my car miss fire intermittently. One spark plug looked a little different in the fouling. Because it was only sometimes it had not changed the plugs appearance a lot. I changed all coil packs as my car has done 185000km and I just bought it so I don't know when they were last changed. Either they have done a great amount of KMs or they have been changed once before as they normally last about 100000km.

sorry for the late reply i have been away. All the other plugs looked perfectly fine as i replaced them maybe 4 months ago or so but one was black and dry none were wet. Just before i went away i found a rather big split in one of the main intake hoses and i have just replaced that but the battery is dead so i have to wait for it to charge to see if it changed anything. :)

So i started her up and she started fine and went to die. Gave a little bit of throttle and she settled on idle so i let her warm up for a bit. Revs through the rev range beautifully but now at idle she sounds like shes missing occasionally so i disconnected each coil pack one by one and it sounded worse every time so the coil packs arent the problem. This problem is unrelated btw it was doing this for a week or so before she died.

Went for a drive and she is pulling harder than she ever has been and my boost gauge was only hitting 7 psi instead of 10? Then i popped a hose that i must not have tightened properly but i lovely lady with a 200 sx came running out of her house with tools so could get it home haha

I know im just a little slow haha :)

I believe all my problems have gone away now after i fixed the boost leak and cleaned the IAC Valve. No weird idle and car has alot more power but kinda feels like it pulls back slightly once it hits boost. Thanks for the advice tho Hadouken was very helpful :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m here solo don’t have any hands to help so haven’t hit it with a timing light 
    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
×
×
  • Create New...